Return-Path: From: Marcel Holtmann To: BlueZ development In-Reply-To: References: Date: Mon, 29 Jan 2007 19:06:20 +0100 Message-Id: <1170093980.15389.214.camel@violet> Mime-Version: 1.0 Subject: Re: [Bluez-devel] Bluez-devel Digest, Vol 9, Issue 99 Reply-To: BlueZ development List-Id: BlueZ development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-devel-bounces@lists.sourceforge.net Errors-To: bluez-devel-bounces@lists.sourceforge.net Hi Quinton, > Sorry for the confusion, I would like to confirm that > > 1. First display is right from hcidump, > HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 > handle 1 ptype 0x2000 > Packet type: 3-DH5 > > However, the problem for this is we just disabled the 3-DH5 > packet type, instead of enabling it, whose function is reversed among > BDR and EDR > > 2. Second display is wrong which is caused firmware the hcidump can have bugs, but in general it is a stupid program that only decodes the binary HCI packets into human readable format. Feel free to disable the verbose decoding (-V switch) and decode the binary hex data by yourself to confirm it. Regards Marcel ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel