Return-Path: From: Marcel Holtmann To: BlueZ development In-Reply-To: <6669365c0705150801g1868b3c4v40c59eba01e6e832@mail.gmail.com> References: <6669365c0705150801g1868b3c4v40c59eba01e6e832@mail.gmail.com> Date: Tue, 15 May 2007 17:31:41 +0200 Message-Id: <1179243101.10069.23.camel@violet> Mime-Version: 1.0 Subject: Re: [Bluez-devel] BCM2035 on UART at speeds higher than 230400 Reply-To: BlueZ development List-Id: BlueZ development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-devel-bounces@lists.sourceforge.net Errors-To: bluez-devel-bounces@lists.sourceforge.net Hi Daniel, > I am working on bluetooth support for the Motorola EZX platform > (a780/e680 phones) and i am unable to hciattach bcm2035 at baud rates > higher than 230400. > > I reverse engineered the original firmware and found that it uses a > different argument to the hci command that sets the baud rate when > setting 460800 and 921600, i have changed hciattach.c and it works at > full speed for me now. > > What i want to know is if anyone is using this chip at rates higher > than 230400 before submiting my patch, so it doesnt break anyone else > work. Currently i know that the EZX platform and most Palm handhelds > use this chip on the UART port. My patch works for EZX and i am > waiting feedback from the hackndev guys about the palms. > > My patch also adds support for setting the bdaddr on chip init, > otherwise this chip gets 00:00:00:00:00:00. post your patch and I will integrate it. Regards Marcel ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel