Message-ID: <466F1A0E.1080401@evilgenius.de>
Date: Wed, 13 Jun 2007 00:11:26 +0200
From: Martin Karger <martin@evilgenius.de>
MIME-Version: 1.0
To: BlueZ development <bluez-devel@lists.sourceforge.net>
References: <20070516021849.199f3034@localhost.local>
	<464C6CF3.3090600@evilgenius.de>
In-Reply-To: <464C6CF3.3090600@evilgenius.de>
Subject: Re: [Bluez-devel] Revive Dead Dongle
Reply-To: BlueZ development <bluez-devel@lists.sourceforge.net>
Content-Type: text/plain; charset="iso-8859-1"
Sender: bluez-devel-bounces@lists.sourceforge.net
Errors-To: bluez-devel-bounces@lists.sourceforge.net

Martin Karger wrote:
> Andreas B=F6hler wrote:
>> Hey, =

>>
>> I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3.
>> Unfortunately, the upgrade seems to have failed: The D-Link's light
>> don't light up anymore and no USB-device is detected when plugging
>> in the device.
>>
>> Is there a known way to force the Dongle to boot into DFU-Mode? Or
>> is it hopelessly flashed to death?
> =

> if it has spi you might be able to reflash. but i never tried that.

short article on debricking you bt-dongle via spi:
http://www.evilgenius.de/2007/06/11/de-bricking-your-bluetooth-dongle/


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel