Return-Path: Date: Sun, 10 Jun 2007 14:21:44 +0800 (CST) From: =?GBK?B?t8nM7Nbt?= To: bluez-users@lists.sourceforge.net, bluez-devel@lists.sourceforge.net Message-ID: <10227247.9077211181456505247.JavaMail.coremail@bj163app59.163.com> MIME-Version: 1.0 Subject: [Bluez-devel] Can't find the device in arm machine. Reply-To: BlueZ development List-Id: BlueZ development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: multipart/mixed; boundary="===============1138247423==" Sender: bluez-devel-bounces@lists.sourceforge.net Errors-To: bluez-devel-bounces@lists.sourceforge.net --===============1138247423== Content-Type: multipart/Alternative; boundary="----=_Part_973812_21147067.1181456505243" ------=_Part_973812_21147067.1181456505243 Content-Type: text/plain; charset=gbk Content-Transfer-Encoding: quoted-printable Hello!I have compiled bluez-libs-3.11 and bluez-utils-3.11 in scratchbox fo= r arm successfully. Then I put the library files in /usr/lib and utilities = in /usr/bin as well .And I compressed the new target system to a scram form= at file and downloaded the file in my machine which uses s3c2440 as its cor= e and uses linux 2.6.12 kernel..But when I plugged my usb dongle which is p= roduced by Integrated System Solution Corporation with HCI 1.1 version, and= the following error messages appeared in my DNW windows which is produced = by SANSUM as a console. [root@(none) /]# usb 1-1: new full speed USB device using s3c2410-ohci and = address 6 usb 1-1: unable to read config index 0 descriptor/start usb 1-1: can't read configurations, error -110 usb 1-1: new full speed USB device using s3c2410-ohci and address 7 usb 1-1: unable to read config index 0 descriptor/start usb 1-1: can't read configurations, error -110 usb 1-1: new full speed USB device using s3c2410-ohci and address 8 usb 1-1: device descriptor read/all, error -110 usb 1-1: new full speed USB device using s3c2410-ohci and address 9 usb 1-1: unable to read config index 0 descriptor/start usb 1-1: can't read configurations, error =A8C110 Then when I entered all the Bluetooth utilities commands such as hcitool , = the error message emerged and they couldn=A1=AFt work at all. [root@(none) /]# hcitool scan Reading data from NAND FLASH without ECC is not recommended Device is not available: No such device Shall I have to enble some usb options in kernel configuration when compile= kernel? But I have enabled two usb controller option and usb siereis conve= rter option. Is bluetooth usb driver independent on usb options? If not whi= ch options should I enable at least? Can anyone help me to figure out the p= roblem?=20 The booting message appeared in my console window is in the following. CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T) CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets Machine: SMDK2410 ATAG_INITRD is deprecated; please update your bootloader. Memory policy: ECC disabled, Data cache writeback CPU S3C2440A (id 0x32440001) S3C2440: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz S3C2410 Clocks, (c) 2004 Simtec Electronics USB Control, (c) 2006 ucdragon yl2440.new Built 1 zonelists Kernel command line: root=3D/dev/mtdblock2 init=3D/linuxrc load_ramdisk=3D0= console=3DttySAC1,115200 mem=3D65536K devfs=3Dmount shp240 irq: clearing pending ext status 00007200 irq: clearing subpending status 00000092 PID hash table entries: 512 (order: 9, 8192 bytes) timer tcon=3D00590000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) =20 Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 64MB =3D 64MB total Memory: 61440KB available (2712K code, 498K data, 160K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2440: Initialising architecture S3C2440: IRQ Support S3C2440: Clock Support, UPLL 96.000 MHz SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 NetWinder Floating Point Emulator V0.97 (double precision) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 NTFS driver 2.1.22 [Flags: R/W]. JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. yaffs Jun 6 2007 20:36:18 Installing. Initializing Cryptographic API --- s3c2410fb init ---!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! pxafb_probe start!!!!!!!!!!!!!!!!!!!!!!!!!! s3c2410-lcd s3c2410-lcd: Invalid resolution or bit depth s3c2410-lcd: probe of s3c2410-lcd failed with error -22 Console: switching to colour frame buffer device 80x25 fb0: Virtual frame buffer device, using 1024K of video memory in s3c2410ts init() success get major number!!!!!! s3c2410-ts device driver MAJOR:253 success to get adc clock source! base_addr =3D 0xc4962000 line 535 passed! register s3c2410-ts driver success, return code is 0 S3C2410 RTC, (c) 2004 Simtec Electronics initialize ST16C550 on yl-2410 board, iobase =3D 0xd4000000 =20 Serial: 8250/16550 driver $Revision: 1.90 $ ,hace done serial8250_io_init!!= !!5 ports, IRQ sharing disabled have enter serial8250_isa_init_ports!iobase =3D 0xc4980000 line 2166 passed line 2168 passed before uart_configure_port! line 1958 passed line 1960 passed IN!!line 1965 passed enter uart_report_port() line 1918 passed ttsA0 at I/O 0xc4980000 (irq =3D 57) is a 16550A line 1967 passed line 1974 passed line 1976 passed line 1984 passed after uart_configure_port! line 2196 passed line 2198 passed line 2166 passed line 2168 passed before uart_configure_port! line 1958 passed line 1960 passed IN!!line 1965 passed enter uart_report_port() line 1918 passed s3c2410_serial0 at MMIO 0x50000000 (irq =3D 70) is a S3C2440 line 1967 passed line 1974 passed line 1976 passed line 1984 passed after uart_configure_port! line 2196 passed line 2198 passed line 2166 passed line 2168 passed before uart_configure_port! line 1958 passed line 1960 passed IN!!line 1965 passed enter uart_report_port() line 1918 passed s3c2410_serial1 at MMIO 0x50004000 (irq =3D 73) is a S3C2440 line 1967 passed line 1974 passed =20 line 1976 passed after uart_configure_port! line 2196 passed line 2198 passed line 2166 passed line 2168 passed before uart_configure_port! line 1958 passed line 1960 passed IN!!line 1965 passed enter uart_report_port() line 1918 passed s3c2410_serial2 at MMIO 0x50008000 (irq =3D 76) is a S3C2440 line 1967 passed line 1974 passed line 1976 passed line 1984 passed after uart_configure_port! line 2196 passed line 2198 passed io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) nbd: registered device at major 43 ub: sizeof ub_scsi_cmd 68 ub_dev 2384 ub_lun 140 usbcore: registered new driver ub PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 Cirrus Logic CS8900A driver for Linux (V0.02) dev->base_addr=3D0xe0000300<3>line 689 passed,request_region() OK!success g= et IO port address! eth0: CS8900A rev E detected BWSCON=3D2211d110 GPFCON=3D1a6aaaa EXTINT0=3D22122242 INTMSK=3D6f7f3d9f BWSCON=3D221dd110 GPFCON=3D1a6aaaa EXTINT0=3D21122242 =20 INTMSK=3D6f7f3d9f DM9000 ethernet driver V1.26 I/O: c4974300, VID: 90000a46 success to exe register_netdev.in another word err >0, the last edition,new MAC address!! Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=3D= xx SET CF & IDE WAIT!now BWSCON=3D225dd510 now begin cf_ide_init_default_hwifs() have initialized interrupt for cf:EINT3 fla2612:INTMSK=3D6f7f3d95 GPFCON=3D000055aa EXTINT0=3D00004040 GPBCON=3D00100154 GPBDAT=3D000007e2 -1:no 0:ok CF_register_hw return -1 -1:no 0:ok ide_register_hw return -1 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2410-nand: mapped registers at c4b00000 s3c2410-nand: timing: Tacls 10ns, Twrph0 40ns, Twrph1 10ns NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V = 8-bit) NAND_ECC_NONE selected by board driver. This is not recommended !! Scanning device for bad blocks Creating 4 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00000000-0x00030000 : "Boot modified by fla in devs.c" 0x00030000-0x00200000 : "Kernel" 0x00200000-0x02000000 : "RootFileSystem" 0x02000000-0x04000000 : "ExtendFileSystem" usbmon: debugs is not available hello,enter new ohci-s3c2410.c CLKDIVN =3D 0000000d CLKSLOW =3D 00000004 CLKCON =3D 00f2eb70 UPLLCON =3D 00038021 s3c2410-ohci s3c2410-ohci: S3C24XX OHCI s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 usb usb1: Product: S3C24XX OHCI usb usb1: Manufacturer: Linux 2.6.12-h1940 ohci_hcd usb usb1: SerialNumber: s3c24xx hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected sl811: driver sl811-hcd, 19 May 2005 =20 usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 mice: PS/2 mouse device common for all mice i2c /dev entries driver s3c2440-i2c s3c2440-i2c: slave address 0x10 s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter Bluetooth: HCI USB driver ver 2.8 usbcore: registered new driver hci_usb Bluetooth: Broadcom Blutonium firmware driver ver 1.0 usbcore: registered new driver bcm203x Bluetooth: Digianswer Bluetooth USB driver ver 0.8 usbcore: registered new driver bpa10x Bluetooth: BlueFRITZ! USB driver ver 1.1 usbcore: registered new driver bfusb line 1408 passed! virtual address of s3c2410_va_iis=3Df0d00000. next will do driver_register! just enter s3c2410_uda1341_probe() S3C2410-UDA1341 Probe line 1322 passed! line 1325 passed! line 1327 passed! have set L3 mode=3DGPB2, dat=3DGPB3, clk=3DGPB4, output line 1330 passed! line 1332 passed! have set IISLRCK=3DGPE0, IISSCLK=3DGPE1, CDCLK=3DGPE2, IISSDI=3DGPE3, IISSD= O=3DGPE4 line 1336 passed! have Enable IIS clock line 1287 passed! line 238 passed! line 275 passed! line 275 passed! line 275 passed! line 238 passed! line 275 passed! line 275 passed! line 275 passed! line 275 passed! line 275 passed! line 1309 passed! success register irq: iisout_dma_done_handler success register irq: iisin_dma_done_handler =20 UDA1341 audio driver initialized driver uda1341 in /sound/oss/s3c2410-oss.c line 1414 passed! NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) NET: Registered protocol family 1 Bluetooth: L2CAP ver 2.7 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.4 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM ver 1.5 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 Reading data from NAND FLASH without ECC is not recommended VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Freeing init memory: 160K Reading data from NAND FLASH without ECC is not recommended Reading data from NAND FLASH without ECC is not recommended Using /usr/usbfor2440.ko OLD: UPLLCON =3D 0x00078023 CLKCON =3D 0x00f3ebf0 CLKSLOW =3D 0x00000004 CLKDIVN =3D 0x0000000d starting modifiy upllcon... NEW: UPLLCON =3D 0x00038021 CLKCON =3D 0x00f2eb70 CLKSLOW =3D 0x00000004 CLKDIVN =3D 0x0000000d mount: Mounting none on /proc/bus/usb failed: No such file or directory Please press Enter to activate this console. Reading data from NAND FLASH w= ithout ECC is not recommended cirrus_start: requesting interrupt 53 Invalid cs8900 irq eth0: register interrupt 53 successfuly ln: /dev/touchscreen/0: File exists Could not open mime.types file, "etc/mime.types", for reading mount: Mounting /dev/nfblock/3 on /tmp/flashdisk failed: No such file or di= rectory mount: Mounting /dev/nfblock/2 on /tmp/mplayer failed: No such file or dire= ctory Reading data from NAND FLASH without ECC is not recommended Reading data from NAND FLASH without ECC is not recommended Reading data from NAND FLASH without ECC is not recommended mapping /dev/fb0: Invalid argument Error: failed to map framebuffer device to memory. mapping /dev/fb0: Invalid argument Error: failed to map framebuffer device Please press Enter to activate this console. = Wang Jimscen = Jun 10,2007 = ------=_Part_973812_21147067.1181456505243 Content-Type: text/html; charset=gbk Content-Transfer-Encoding: quoted-printable

Hello!I have compiled bluez-libs-3.11 and bluez-u= tils-3.11 in scratchbox for arm successfully. Then I put the library files = in /usr/lib and utilities in /usr/bin as well .And I compressed the ne= w target system to a scram format file and downloaded the file in my machin= e which uses s3c2440 as its core and uses linux 2.6.12 kernel..But when I p= lugged my usb dongle which is produced by Integrated System Solution Corpor= ation with HCI 1.1 version, and the following error messages appeared in my= DNW windows which is produced by SANSUM as a console.

[root@(none) /]# usb 1-1: new full speed USB devi= ce using s3c2410-ohci and address 6

usb 1-1: unable to read config index 0 descriptor= /start

usb 1-1: can't read configurations, error -110

usb 1-1: new full speed USB device using s3c2410-= ohci and address 7

usb 1-1: unable to read config index 0 descriptor= /start

usb 1-1: can't read configurations, error -110

usb 1-1: new full speed USB device using s3c2410-= ohci and address 8

usb 1-1: device descriptor read/all, error -110

usb 1-1: new full speed USB device using s3c2410-= ohci and address 9

usb 1-1: unable to read config index 0 descriptor= /start

usb 1-1: can't read configurations, error =A8C110=

Then when I entered all the Bluetooth utilities c= ommands such as hcitool , the error message emerged and they couldn=A1=AFt = work at all.

[root@(none) /]# hcitool scan

Reading data from NAND FLASH without ECC is not r= ecommended

Device is not available: No such device

Shall I have to enble some usb options in kernel = configuration when compile kernel? But I have enabled two usb controller op= tion and usb siereis converter option. Is bluetooth usb driver independent = on usb options? If not which options should I enable at least? Can anyone h= elp me to figure out the problem?  <= /SPAN>

The booting message appeared in my console window= is in the following.

CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)=

CPU0: D VIVT write-back cache

CPU0: I cache: 16384 bytes, associativity 64, 32 = byte lines, 8 sets

CPU0: D cache: 16384 bytes, associativity 64, 32 = byte lines, 8 sets

Machine: SMDK2410

ATAG_INITRD is deprecated; please update your boo= tloader.

Memory policy: ECC disabled, Data cache writeback=

CPU S3C2440A (id 0x32440001)

S3C2440: core 400.000 MHz, memory 100.000 MHz, pe= ripheral 50.000 MHz

S3C2410 Clocks, (c) 2004 Simtec Electronics

USB Control, (c) 2006 ucdragon yl2440.new<= /SPAN>

Built 1 zonelists

Kernel command line: root=3D/dev/mtdblock2 init= =3D/linuxrc load_ramdisk=3D0 console=3DttySAC1,115200 mem=3D65536K devfs=3D= mount shp240

irq: clearing pending ext status 00007200<= /SPAN>

irq: clearing subpending status 00000092

PID hash table entries: 512 (order: 9, 8192 bytes= )

timer tcon=3D00590000, tcnt a2c1, tcfg 00000200,0= 0000000, usec 00001eb8

Console: colour dummy device 80x30<= /P>

Dentry cache hash table entries: 16384 (order: 4,= 65536 bytes)

 

Inode-cache hash table entries: 8192 (order: 3, 3= 2768 bytes)

Memory: 64MB =3D 64MB total

Memory: 61440KB available (2712K code, 498K data,= 160K init)

Mount-cache hash table entries: 512=

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16<= /P>

S3C2440: Initialising architecture<= /P>

S3C2440: IRQ Support

S3C2440: Clock Support, UPLL 96.000 MHz

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub<= /P>

Bluetooth: Core ver 2.7

NET: Registered protocol family 31<= /P>

Bluetooth: HCI device and connection manager init= ialized

Bluetooth: HCI socket layer initialized

S3C2410 DMA Driver, (c) 2003-2004 Simtec Electron= ics

DMA channel 0 at c4800000, irq 33

DMA channel 1 at c4800040, irq 34

DMA channel 2 at c4800080, irq 35

DMA channel 3 at c48000c0, irq 36

NetWinder Floating Point Emulator V0.97 (double p= recision)

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csir= o.au)

devfs: boot_options: 0x1

NTFS driver 2.1.22 [Flags: R/W].

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, = Inc.

yaffs Jun = 6 2007 20:36:18 Installing.

Initializing Cryptographic API

--- s3c2410fb init ---!!!!!!!!!!!!!!!!!!!!!!!!!!!= !!!!!!!!

pxafb_probe start!!!!!!!!!!!!!!!!!!!!!!!!!!

s3c2410-lcd s3c2410-lcd: Invalid resolution or bi= t depth

s3c2410-lcd: probe of s3c2410-lcd failed with err= or -22

Console: switching to colour frame buffer device = 80x25

fb0: Virtual frame buffer device, using 1024K of = video memory

in s3c2410ts init()

success get major number!!!!!!

s3c2410-ts device driver MAJOR:253<= /P>

success to get adc clock source!

base_addr =3D 0xc4962000

line 535 passed!

register s3c2410-ts driver success, return code i= s 0

S3C2410 RTC, (c) 2004 Simtec Electronics

initialize ST16C550 on yl-2410 board, iobase =3D = 0xd4000000

 

Serial: 8250/16550 driver $Revision: 1.90 $ ,hace= done serial8250_io_init!!!!5 ports, IRQ sharing disabled

have enter serial8250_isa_init_ports!iobase =3D 0= xc4980000

line 2166 passed

line 2168 passed

before uart_configure_port!

line 1958 passed

line 1960 passed

IN!!line 1965 passed

enter uart_report_port() line 1918 passed<= /SPAN>

ttsA0 at I/O 0xc4980000 (irq =3D 57) is a 16550A<= /FONT>

line 1967 passed

line 1974 passed

line 1976 passed

line 1984 passed

after uart_configure_port!

line 2196 passed

line 2198 passed

line 2166 passed

line 2168 passed

before uart_configure_port!

line 1958 passed

line 1960 passed

IN!!line 1965 passed

enter uart_report_port() line 1918 passed<= /SPAN>

s3c2410_serial0 at MMIO 0x50000000 (irq =3D 70) i= s a S3C2440

line 1967 passed

line 1974 passed

line 1976 passed

line 1984 passed

after uart_configure_port!

line 2196 passed

line 2198 passed

line 2166 passed

line 2168 passed

before uart_configure_port!

line 1958 passed

line 1960 passed

IN!!line 1965 passed

enter uart_report_port() line 1918 passed<= /SPAN>

s3c2410_serial1 at MMIO 0x50004000 (irq =3D 73) i= s a S3C2440

line 1967 passed

line 1974 passed

 

line 1976 passed

after uart_configure_port!

line 2196 passed

line 2198 passed

line 2166 passed

line 2168 passed

before uart_configure_port!

line 1958 passed

line 1960 passed

IN!!line 1965 passed

enter uart_report_port() line 1918 passed<= /SPAN>

s3c2410_serial2 at MMIO 0x50008000 (irq =3D 76) i= s a S3C2440

line 1967 passed

line 1974 passed

line 1976 passed

line 1984 passed

after uart_configure_port!

line 2196 passed

line 2198 passed

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered

RAMDISK driver initialized: 16 RAM disks of 4096K= size 1024 blocksize

loop: loaded (max 8 devices)

nbd: registered device at major 43<= /P>

ub: sizeof ub_scsi_cmd 68 ub_dev 2384 ub_lun 140<= /FONT>

usbcore: registered new driver ub

PPP generic driver version 2.4.2

PPP Deflate Compression module registered<= /SPAN>

PPP BSD Compression module registered

NET: Registered protocol family 24<= /P>

Cirrus Logic CS8900A driver for Linux (V0.02)

dev->base_addr=3D0xe0000300<3>line 689 p= assed,request_region() OK!success get IO port address!

eth0: CS8900A rev E detected

BWSCON=3D2211d110

GPFCON=3D1a6aaaa

EXTINT0=3D22122242

INTMSK=3D6f7f3d9f

BWSCON=3D221dd110

GPFCON=3D1a6aaaa

EXTINT0=3D21122242

 

INTMSK=3D6f7f3d9f

DM9000 ethernet driver V1.26 I/O: c4974300, VID: = 90000a46

 su= ccess to exe register_netdev.in another word err >0,

 th= e last edition,new MAC address!!

Linux video capture interface: v1.00

Uniform Multi-Platform E-IDE driver Revision: 7.0= 0alpha2

ide: Assuming 50MHz system bus speed for PIO mode= s; override with idebus=3Dxx

 SE= T CF & IDE WAIT!now BWSCON=3D225dd510

now begin cf_ide_init_default_hwifs()

have initialized interrupt for cf:EINT3

fla2612:INTMSK=3D6f7f3d95

GPFCON=3D000055aa

EXTINT0=3D00004040

GPBCON=3D00100154

GPBDAT=3D000007e2

-1:no 0:ok CF_register_hw return -1=

-1:no 0:ok ide_register_hw return -1

S3C24XX NAND Driver, (c) 2004 Simtec Electronics<= /FONT>

s3c2410-nand: mapped registers at c4b00000=

s3c2410-nand: timing: Tacls 10ns, Twrph0 40ns, Tw= rph1 10ns

NAND device: Manufacturer ID: 0xec, Chip ID: 0x76= (Samsung NAND 64MiB 3,3V 8-bit)

NAND_ECC_NONE selected by board driver. This is n= ot recommended !!

Scanning device for bad blocks

Creating 4 MTD partitions on "NAND 64MiB 3,3V 8-b= it":

0x00000000-0x00030000 : "Boot modified by fla in = devs.c"

0x00030000-0x00200000 : "Kernel"

0x00200000-0x02000000 : "RootFileSystem"

0x02000000-0x04000000 : "ExtendFileSystem"=

usbmon: debugs is not available

hello,enter new ohci-s3c2410.c

CLKDIVN =3D 0000000d

CLKSLOW =3D 00000004

CLKCON =3D 00f2eb70

UPLLCON =3D 00038021

s3c2410-ohci s3c2410-ohci: S3C24XX OHCI

s3c2410-ohci s3c2410-ohci: new USB bus registered= , assigned bus number 1

s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000= 000

usb usb1: Product: S3C24XX OHCI

usb usb1: Manufacturer: Linux 2.6.12-h1940 ohci_h= cd

usb usb1: SerialNumber: s3c24xx

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

sl811: driver sl811-hcd, 19 May 2005

 

usbcore: registered new driver usbserial

drivers/usb/serial/usb-serial.c: USB Serial suppo= rt registered for Generic

usbcore: registered new driver usbserial_generic<= /FONT>

drivers/usb/serial/usb-serial.c: USB Serial Drive= r core v2.0

mice: PS/2 mouse device common for all mice

i2c /dev entries driver

s3c2440-i2c s3c2440-i2c: slave address 0x10

s3c2440-i2c s3c2440-i2c: bus frequency set to 390= KHz

s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter

Bluetooth: HCI USB driver ver 2.8

usbcore: registered new driver hci_usb

Bluetooth: Broadcom Blutonium firmware driver ver= 1.0

usbcore: registered new driver bcm203x

Bluetooth: Digianswer Bluetooth USB driver ver 0.= 8

usbcore: registered new driver bpa10x

Bluetooth: BlueFRITZ! USB driver ver 1.1

usbcore: registered new driver bfusb

line 1408 passed!

virtual address of s3c2410_va_iis=3Df0d00000.

next will do driver_register!

just enter s3c2410_uda1341_probe()<= /P>

S3C2410-UDA1341 Probe

line 1322 passed!

line 1325 passed!

line 1327 passed! have set L3 mode=3DGPB2, dat=3D= GPB3, clk=3DGPB4, output

line 1330 passed!

line 1332 passed!

have set IISLRCK=3DGPE0, IISSCLK=3DGPE1, CDCLK=3D= GPE2, IISSDI=3DGPE3, IISSDO=3DGPE4

line 1336 passed! have Enable IIS clock

line 1287 passed!

line 238 passed!

line 275 passed!

line 275 passed!

line 275 passed!

line 238 passed!

line 275 passed!

line 275 passed!

line 275 passed!

line 275 passed!

line 275 passed!

line 1309 passed!

success register irq: iisout_dma_done_handler

success register irq: iisin_dma_done_handler

 

UDA1341 audio driver initialized

driver uda1341 in /sound/oss/s3c2410-oss.c=

line 1414 passed!

NET: Registered protocol family 2

IP: routing cache hash table of 512 buckets, 4Kby= tes

TCP established hash table entries: 4096 (order: = 3, 32768 bytes)

TCP bind hash table entries: 4096 (order: 2, 1638= 4 bytes)

TCP: Hash tables configured (established 4096 bin= d 4096)

NET: Registered protocol family 1

Bluetooth: L2CAP ver 2.7

Bluetooth: L2CAP socket layer initialized<= /SPAN>

Bluetooth: SCO (Voice Link) ver 0.4=

Bluetooth: SCO socket layer initialized

Bluetooth: RFCOMM ver 1.5

Bluetooth: RFCOMM socket layer initialized=

Bluetooth: RFCOMM TTY layer initialized

Bluetooth: BNEP (Ethernet Emulation) ver 1.2

Bluetooth: HIDP (Human Interface Emulation) ver 1= .1

Reading data from NAND FLASH without ECC is not r= ecommended

VFS: Mounted root (cramfs filesystem) readonly.

Mounted devfs on /dev

Freeing init memory: 160K

Reading data from NAND FLASH without ECC is not r= ecommended

Reading data from NAND FLASH without ECC is not r= ecommended

Using /usr/usbfor2440.ko

OLD:

UPLLCON =3D 0x00078023

CLKCON =3D 0x00f3ebf0

CLKSLOW =3D 0x00000004

CLKDIVN =3D 0x0000000d

starting modifiy upllcon...

NEW:

UPLLCON =3D 0x00038021

CLKCON =3D 0x00f2eb70

CLKSLOW =3D 0x00000004

CLKDIVN =3D 0x0000000d

mount: Mounting none on /proc/bus/usb failed: No = such file or directory

Please press Enter to activate this console. Read= ing data from NAND FLASH without ECC is not recommended

cirrus_start: requesting interrupt 53

Invalid cs8900 irq

eth0: register interrupt 53 successfuly

ln: /dev/touchscreen/0: File exists=

Could not open mime.types file, "etc/mime.types",= for reading

mount: Mounting /dev/nfblock/3 on /tmp/flashdisk = failed: No such file or directory

mount: Mounting /dev/nfblock/2 on /tmp/mplayer fa= iled: No such file or directory

Reading data from NAND FLASH without ECC is not r= ecommended

Reading data from NAND FLASH without ECC is not r= ecommended

Reading data from NAND FLASH without ECC is not r= ecommended

mapping /dev/fb0: Invalid argument<= /P>

Error: failed to map framebuffer device to memory= .

mapping /dev/fb0: Invalid argument<= /P>

Error: failed to map framebuffer device

Please press Enter to activate this console.

 
 
           &nbs= p;            &= nbsp;           &nbs= p;            &= nbsp;           Wang Jims= cen
           &nbs= p;            &= nbsp;           &nbs= p;            &= nbsp;           &nbs= p;Jun 10,2007         &nb= sp;            =             &nb= sp;            =  
 


150 =CD= =F2 =C8=CB =CD=AC =CA=B1 =D4=DA =CD=E6 =B5=C4 =CD=F8 =D3=CE=A3=AC=C4=E3 =B2= =BB =CA=D4 =CA=D4 =C2=F0 =A3=BF ------=_Part_973812_21147067.1181456505243-- --===============1138247423== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ --===============1138247423== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel --===============1138247423==--