Message-ID: <20071207092240.jtm1je3tcc4cwo40@www.nexusmail.uwaterloo.ca>
Date: Fri, 07 Dec 2007 09:22:40 -0500
From: gpolack@engmail.uwaterloo.ca
To: bluez-devel@lists.sourceforge.net
MIME-Version: 1.0
Subject: [Bluez-devel] BlueZ protocol stack on microcontroller
Reply-To: BlueZ development <bluez-devel@lists.sourceforge.net>
Content-Type: text/plain; charset="us-ascii"
Sender: bluez-devel-bounces@lists.sourceforge.net
Errors-To: bluez-devel-bounces@lists.sourceforge.net

Hello,

I'm new to using Bluetooth modules and would appreciate some guidance.  
I'm connecting a Bluetooth module that has a UART interface to a  
microcontroller, and I wish to use the BlueZ protocol stack to talk to  
the module but I know nothing about how the protocol works. Can it be  
configured to talk via UART to the module? Also, what is the minimal  
set of functions one would need for simple data transfer between two  
Bluetooth modules, no stereo audio, or other fancy stuff? My questions  
will get more specific as I start understanding how this all works.

Thank you,
Jorge


-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel