Return-Path: From: Guillaume Bedot To: BlueZ development In-Reply-To: <1201336771.22866.7.camel@littletux> References: <1201336771.22866.7.camel@littletux> Date: Sat, 26 Jan 2008 10:01:29 +0100 Message-Id: <1201338089.22866.14.camel@littletux> Mime-Version: 1.0 Subject: Re: [Bluez-devel] HT820, capture and eSCO Reply-To: BlueZ development List-Id: BlueZ development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-devel-bounces@lists.sourceforge.net Errors-To: bluez-devel-bounces@lists.sourceforge.net On sam, 2008-01-26 at 09:39 +0100, Guillaume Bedot wrote: > Hello, > > I have issues using "voice"/HSP/HFP profiles with this headset and > latest kernels/bluez cvs. > > It seems it tries to use extended SCO when it shouldn't... > > hcitool info xx:xx:xx:xx:xx:xx > Requesting information ... > BD Address: xx:xx:xx:xx:xx:xx > Device Name: Motorola HT820 > LMP Version: 2.0 (0x3) LMP Subversion: 0xa41 > Manufacturer: Cambridge Silicon Radio (10) > Features: 0xff 0xff 0x8b 0x78 0x18 0x18 0x00 0x80 > <3-slot packets> <5-slot packets> > > > > > > > If it can help, I noticed there are a lot of these messages in syslog : Jan 26 07:52:05 littletux kernel: hci_scodata_packet: hci0 SCO packet for unknown connection handle 1 And with "hifi" profile, the headset playback works although it seems to use eSCO too : hcitool con Connections: > ACL xx:xx:xx:xx:xx:xx handle 11 state 1 lm SLAVE AUTH ENCRYPT SECURE < eSCO xx:xx:xx:xx:xx:xx handle 0 state 8 lm SLAVE I'm not sure what the problem is anymore... Best regards, Guillaume B. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel