Return-Path: Message-Id: From: Marcel Holtmann To: BlueZ development In-Reply-To: <003901c8900a$a282e860$6701a8c0@freqonedev> Mime-Version: 1.0 (Apple Message framework v919.2) Date: Thu, 27 Mar 2008 16:03:36 +0100 References: <003901c8900a$a282e860$6701a8c0@freqonedev> Subject: Re: [Bluez-devel] TODO: --enable/--disable options in bluez-utils Reply-To: BlueZ development List-Id: BlueZ development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-devel-bounces@lists.sourceforge.net Errors-To: bluez-devel-bounces@lists.sourceforge.net Hi David, > Subsequent to yesterday's post, I found all of the configure options > to enable/disable various options. > > In my application, I have no real need (at this point, at least) for > audio streaming, and I might like to diable -gstreamer, -alsa, and > similar options. Probably would also disable -serial and certain > other profiles. > > And there are other things, like --enable-usb, which if I disable it > might turn off my USB-connected Bluetooth dongle. I will not. It is only needed for using libusb. > However, at this point I am using --enable-all, since there is no > real documentation of the dependencies. Any chance these might be > documented: with 27 options, that's about 268 million permutations, > which would take a while to figure out... A lot of these options will go away when we hit 4.0, but feel free to start a wiki page and start documenting them. Regards Marcel ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel