Return-Path: Message-Id: From: Marcel Holtmann To: BlueZ development In-Reply-To: <47EA7502.0@access-company.com> Mime-Version: 1.0 (Apple Message framework v919.2) Date: Wed, 26 Mar 2008 17:16:51 +0100 References: <47EA7502.0@access-company.com> Subject: Re: [Bluez-devel] HID certification using PTS Reply-To: BlueZ development List-Id: BlueZ development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-devel-bounces@lists.sourceforge.net Errors-To: bluez-devel-bounces@lists.sourceforge.net Hi Frederic, > I am testing HID (BlueZ utils 3.22) using latest PTS (2.3.1) and I got > some problems with it : > > - currently, when performing a CreateDevice, input service connects > then > disconnects from remote device. This makes some tests failed. > What do you think if this does not disconnect (and create classic > device > connection) ? does using CreateSecureDevice helps? Can you verify with bluez- utils-3.29 and see if it is still a problem? > - when kernel (2.6.22) receives a VIRTUAL_CABLE_UNPLUG from PTS (tests > TC_HOS_HCR_BV_02_I and TC_HOS_HCR_BV_04_I) it does not close the L2CAP > channels as PTS waits for. > I take a look in 2.6.22 sources, and it seems to me this disconnection > should happen, am I right ? > Is it fixed in later kernel ? I recall that there was a fix for this. Regards Marcel ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel