From: Tim Chick <chick@computergeek.freeserve.co.uk>
To: bluez-devel@lists.sourceforge.net
Date: Mon, 5 May 2008 21:50:46 +0100
References: <481B2525.3090600@kernelconcepts.de>
In-Reply-To: <481B2525.3090600@kernelconcepts.de>
MIME-Version: 1.0
Message-Id: <200805052150.50832.chick@computergeek.freeserve.co.uk>
Subject: Re: [Bluez-devel] Sychip/Murata WLBT8111 experience?
Reply-To: BlueZ development <bluez-devel@lists.sourceforge.net>
Content-Type: text/plain; charset="us-ascii"
Sender: bluez-devel-bounces@lists.sourceforge.net
Errors-To: bluez-devel-bounces@lists.sourceforge.net

On Friday 02 May 2008 15:28:53 Nils Faerber wrote:
> Hi!
> By some lucky coincidence I have a development board with a
> Sychip/Murata WLBT8111 on it laying on my desk.
> I try to get the UART HCI to respond but so far it is not recognised by
> BlueZ. I see that the module sends data about every 300 to 400
> miliseconds but with any baudrate I tried BlueZ only sais "h4_recv:
> Unknown HCI packet type...".
>
> So, has anyone else yet experience with that chip?
> Any hints or tricks to make it behave?
>
You might like to try BCSP protocol?

Cheers,
TIm


-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel