Message-ID: <009101c8e398$9cbf3550$6701a8c0@freqonedev>
From: "David Stockwell" <dstockwell@frequency-one.com>
To: "BlueZ development" <bluez-devel@lists.sourceforge.net>
References: <0a3901c8e03c$0fd66eb0$6701a8c0@freqonedev>
	<4877BFBE.70305@evilgenius.de>
Date: Fri, 11 Jul 2008 15:56:33 -0500
MIME-Version: 1.0
Subject: Re: [Bluez-devel] SSP testing and BlueZ
Reply-To: BlueZ development <bluez-devel@lists.sourceforge.net>
Content-Type: text/plain; charset="us-ascii"
Sender: bluez-devel-bounces@lists.sourceforge.net
Errors-To: bluez-devel-bounces@lists.sourceforge.net

Hello Martin

> David Stockwell wrote:
>> While attempting to test SSP with 3.34-3.35, I found that I was 
>> unable
>> to pair with SSP; I was able to pair with the legacy
>> pin-request/response mode.  I checked the HCI level of my aging BT
>> dongle (somehow this sounds a bit "dirty"), and found that it was 
>> only
>> HCI 1.1 compliant.  Replacing it with a BT2.0+EDR compliant dongle, I
>> found that it still would not pair with SSP.
>>
>> Consulting with CSR, they confirmed that unless both devices are
>> Bluetooth HCI 2.1 compliant, SSP will not work; it will always fall 
>> back
>> to Legacy pairing.
>>
>> I searched yesterday for HCI 2.1-compliant dongles, and found only 
>> one,
>> from Logitec (not Logitech) in Japan.  These are not available in the 
>> US
>> market.
>>
>
> you can update CSRs BT2.0 with 2.1 Firmware. That should work. I think
> you can download the firmware on the csr support site.
>
I will give this a shot.  Thanks.  Will also need to see if my even 
newer dongle can be upgraded.
DS
>
> 


-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel