Return-Path: Message-ID: <48D95F28.4000708@stephan.co.uk> Date: Tue, 23 Sep 2008 22:27:04 +0100 From: Stephan de Georgio MIME-Version: 1.0 To: BlueZ development References: <48C43D87.2040705@stephan.co.uk> In-Reply-To: Subject: Re: [Bluez-devel] Motorola DC800 Reply-To: BlueZ development List-Id: BlueZ development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Errors-To: bluez-devel-bounces@lists.sourceforge.net Brad, >afaik, this is still only possible using "a2recv" in the old btsco project. Is a2recv not for streaming audio from the DC800 to the PC? I'm trying to stream audio from the PC to the DC800. I can't seem to find any documentation on a2recv except the small snippet below from the bluetooth-alsa build page. >The A2DP sink code receives a stream from another device. Run it with: > hciconfig hci0 class 0x200404 > sdptool add A2SNK > ./a2recv >It will try to bind to the bluetooth adapter and send audio out to /dev/dsp. I have installed the btsco package and tried running this and a2recv just hangs with no output. Is there something else I need to do before running a2recv? I've also tried the command mpg123 --au - file.mp3 | ./a2play bdaddr where bdaddr is the address of the DC800, but this give no audio output either. Any help would be very much appreciated. Regards, Stephan ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel