Date: Fri, 5 Sep 2008 17:26:54 +0100
From: martin f krafft <madduck@madduck.net>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Message-ID: <20080905162654.GA17843@lapse.rw.madduck.net>
References: <20080822073628.GA5989@piper.oerlikon.madduck.net>
	<1219394015.7591.441.camel@violet.holtmann.net>
	<20080826163544.GA5068@lapse.rw.madduck.net>
	<8C64B784-7758-40B0-AE1B-C15F475693D4@holtmann.org>
MIME-Version: 1.0
In-Reply-To: <8C64B784-7758-40B0-AE1B-C15F475693D4@holtmann.org>
Subject: [Bluez-devel] "unable to install hw params" to bluetooth (SCO)
	headset (was:	btusb+sco failing to play sound through Jabra
	BT500v headset)
Reply-To: BlueZ development <bluez-devel@lists.sourceforge.net>
Content-Type: multipart/mixed; boundary="===============0657236474=="
Sender: bluez-devel-bounces@lists.sourceforge.net
Errors-To: bluez-devel-bounces@lists.sourceforge.net


--===============0657236474==
Content-Type: multipart/signed; micalg=pgp-sha1;
	protocol="application/pgp-signature"; boundary="1yeeQ81UyVL57Vl7"
Content-Disposition: inline


--1yeeQ81UyVL57Vl7
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

also sprach Marcel Holtmann <marcel@holtmann.org> [2008.08.26.1819 +0100]:
> don't use headsetd. Use the audio stuff that comes with bluez-utils.

So I am trying, and I got a little further, installing the right
lines into .asoundrc as per
http://wiki.bluez.org/wiki/HOWTO/AudioDevices. I have gotten beyond
issues of

  bt_audio_service_open: connect() failed: Connection refused (111)
  aplay: main:564: audio open error: Connection refused=20

but it still doesn't want to work. If I execute

  arecord -D bt500v -f S16_LE | aplay -D bt500v -f S16_LE

then the headset makes a noise, the bluetooth LED flashes and
arecord prints

  Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono

But then after about 30 or 40 seconds, it all fails:

  ALSA lib pcm_bluetooth.c:464:(bluetooth_hsp_hw_params) BT_SETCONFIGURATIO=
N failed : Input/output error(5)
  arecord: set_params:979: Unable to install hw params:
  ACCESS:  RW_INTERLEAVED
  FORMAT:  S16_LE
  SUBFORMAT:  STD
  SAMPLE_BITS: 16
  FRAME_BITS: 16
  CHANNELS: 1
  RATE: 8000
  PERIOD_TIME: 125000
  PERIOD_SIZE: 1000
  PERIOD_BYTES: 2000
  PERIODS: 4
  BUFFER_TIME: 500000
  BUFFER_SIZE: 4000
  BUFFER_BYTES: 8000
  TICK_TIME: [0 0]
  aplay: playback:2019: read error

I have bluez-audio installed, but /etc/bluetooth/audio.conf is
default. No PulseAudio or anything other than plain ALSA here...

Any clues?

--=20
martin | http://madduck.net/ | http://two.sentenc.es/
=20
"alas, i am dying beyond my means."
                                                        -- oscar wilde
=20
spamtraps: madduck.bogus@madduck.net

--1yeeQ81UyVL57Vl7
Content-Type: application/pgp-signature; name="digital_signature_gpg.asc"
Content-Description: Digital signature (see http://martin-krafft.net/gpg/)
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAkjBXc0ACgkQIgvIgzMMSnX49QCgvf4xnsUtB7qtlPQcyY5kdUkp
2KIAn30WuRYTae8nJe84bvdMYkznpvkA
=HuTR
-----END PGP SIGNATURE-----

--1yeeQ81UyVL57Vl7--


--===============0657236474==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
--===============0657236474==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

--===============0657236474==--