Hi all,
I am trying to connect my Nokia6310i to my LinuxPPC Box.
Installed:
ii bluez-pin 0.22-1 Bluetooth PIN helper with D-BUS support
ii bluez-utils 2.6-0lxtecppc1 Utilities for controlling Bluetooth devices
ii bluez-utils2 0.1-0lxtecppc1 BlueZ utilities
ii libbluetooth1 2.6-0lxtecppc1 Library to use the BlueZ Linux Bluetooth sta
ii libbluez1 0.1-0lxtecppc1 BlueZ library
Linux version 2.6.5--mh2-aragorn (root@aragorn) \
(gcc-Version 3.3.3 (Debian 20040401)) #1 Fri Apr 9 14:53:38 CEST 2004
Running hid2hci out of bluez-utils2 produces following oops:
aragorn:/source/bluez/cvs/utils2/hid# ./hid2hci
Switching device 05ac:1000 to HCI mode was successful
usb 1-1: USB disconnect, address 2
drivers/usb/input/hid-core.c: can't resubmit intr, 0001:01:1a.0-1/input0, status -19
drivers/usb/input/hid-core.c: can't resubmit intr, 0001:01:1a.0-1/input1, status -19
usb 1-1: new full speed USB device using address 3
Oops: kernel access of bad area, sig: 11 [#1]
NIP: F24786B8 LR: F24786C0 SP: EF3E7D00 REGS: ef3e7c50 TRAP: 0301 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 01DAD002, DSISR: 40000000
TASK = ef4c9980[133] 'khubd' Last syscall: -1
GPR00: 00000022 EF3E7D00 EF4C9980 EEE8E800 EF4E42E0 00000000 00000001 00000000
GPR08: F2476F40 01DAD000 EEE8E800 28028224 88028222
Call trace:
[f2478938] usb_set_interface+0x94/0x164 [usbcore]
[f243dadc] hci_usb_probe+0x21c/0x48c [hci_usb]
[f2472090] usb_probe_interface+0x80/0x98 [usbcore]
[c0161dcc] bus_match+0x50/0x8c
[c0161e60] device_attach+0x58/0xbc
[c01620e0] bus_add_device+0x7c/0xd8
[c0160980] device_add+0xb0/0x184
[f2478d24] usb_set_configuration+0x20c/0x25c [usbcore]
[f24733cc] usb_new_device+0x2bc/0x3d4 [usbcore]
[f2474e2c] hub_port_connect_change+0x1a0/0x298 [usbcore]
[f24751f8] hub_events+0x2d4/0x354 [usbcore]
[f24752b4] hub_thread+0x3c/0xf4 [usbcore]
[c000ad4c] kernel_thread+0x44/0x60
Running lsusb after that oops:
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Any hint?
Ciao
Elimar
--
"Talking much about oneself can also
be a means to conceal oneself."
-Friedrich Nietzsche
On Sat, 10 Apr 2004 the mental interface of
Marcel Holtmann told:
> Hi Elimar,
>
> > [...]
> > > looks like another USB problem. Maybe the USB guys already have a fix
> > > for it. Ask them.
> >
> > hci_usb was loaded while running hid2hci. Unloading that module
> > solves the prob. hci_usb is loaded from hotplug after changing to
> > hci by hid2hci.
>
> so this is really an USB race.
Maybe you're right ;-)
Ciao
Elimar
--
On the keyboard of life you have always
to keep a finger at the escape key;-)
Hi Elimar,
> [...]
> > looks like another USB problem. Maybe the USB guys already have a fix
> > for it. Ask them.
>
> hci_usb was loaded while running hid2hci. Unloading that module
> solves the prob. hci_usb is loaded from hotplug after changing to
> hci by hid2hci.
so this is really an USB race.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On Fri, 09 Apr 2004 the mental interface of
Marcel Holtmann told:
> Hi Elimar,
[...]
> looks like another USB problem. Maybe the USB guys already have a fix
> for it. Ask them.
hci_usb was loaded while running hid2hci. Unloading that module
solves the prob. hci_usb is loaded from hotplug after changing to
hci by hid2hci.
Ciao
Elimar
--
>what IMHO then?
IMHO - Inhalation of a Multi-leafed Herbal Opiate ;)
--posting from alex in debian-user--
Hi Elimar,
> Linux version 2.6.5--mh2-aragorn (root@aragorn) \
> (gcc-Version 3.3.3 (Debian 20040401)) #1 Fri Apr 9 14:53:38 CEST 2004
>
> Running hid2hci out of bluez-utils2 produces following oops:
>
> aragorn:/source/bluez/cvs/utils2/hid# ./hid2hci
> Switching device 05ac:1000 to HCI mode was successful
> usb 1-1: USB disconnect, address 2
> drivers/usb/input/hid-core.c: can't resubmit intr, 0001:01:1a.0-1/input0, status -19
> drivers/usb/input/hid-core.c: can't resubmit intr, 0001:01:1a.0-1/input1, status -19
> usb 1-1: new full speed USB device using address 3
> Oops: kernel access of bad area, sig: 11 [#1]
> NIP: F24786B8 LR: F24786C0 SP: EF3E7D00 REGS: ef3e7c50 TRAP: 0301 Not tainted
> MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
> DAR: 01DAD002, DSISR: 40000000
> TASK = ef4c9980[133] 'khubd' Last syscall: -1
> GPR00: 00000022 EF3E7D00 EF4C9980 EEE8E800 EF4E42E0 00000000 00000001 00000000
> GPR08: F2476F40 01DAD000 EEE8E800 28028224 88028222
> Call trace:
> [f2478938] usb_set_interface+0x94/0x164 [usbcore]
> [f243dadc] hci_usb_probe+0x21c/0x48c [hci_usb]
> [f2472090] usb_probe_interface+0x80/0x98 [usbcore]
> [c0161dcc] bus_match+0x50/0x8c
> [c0161e60] device_attach+0x58/0xbc
> [c01620e0] bus_add_device+0x7c/0xd8
> [c0160980] device_add+0xb0/0x184
> [f2478d24] usb_set_configuration+0x20c/0x25c [usbcore]
> [f24733cc] usb_new_device+0x2bc/0x3d4 [usbcore]
> [f2474e2c] hub_port_connect_change+0x1a0/0x298 [usbcore]
> [f24751f8] hub_events+0x2d4/0x354 [usbcore]
> [f24752b4] hub_thread+0x3c/0xf4 [usbcore]
> [c000ad4c] kernel_thread+0x44/0x60
looks like another USB problem. Maybe the USB guys already have a fix
for it. Ask them.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users