Hello,
Michael here - Just getting my feet wet with Bluetooth/linux. Sorry
for the lack of knowhow & simple questions.....
Im running Fedora Core 4 (Upgraded from core 3) and would like to get a
Bluetooth headset working.
Sofar things have been going smoothly.
Purchased a D-Link DBT-122 bluetooth dongle and Logitec Mobile Pro headset.
Typing:
/usr/bin/hcitool dev
Devices:
hci0 00:13:46:00:A5:B7
And after placing the headset into pairing mode:
/usr/bin/hcitool scan
Scanning ...
00:0D:44:0B:AA:A8 Logitech HS01-V16
So far so good.
Now as far as I can figure, I need btsco to link the headset to the alsa
audio system.
Downloaded btsco and followed the directions on
http://bluetooth-alsa.sourceforge.net/
Under the BUILD section, Steps 1-3 seem to have worked. (ie I can run
btsco*)
However Step 4 doesn't seem to work.... Here's what I get:
[root@psyche kernel]# make
make[1]: Entering directory `/usr/src/redhat/SOURCES'
make[1]: *** No rule to make target `modules'. Stop.
make[1]: Leaving directory `/usr/src/redhat/SOURCES'
make: *** [default] Error 2
Im guessing this compiles the snd_bt_sco kernel module. But Im unable to
compile it.
Am I doing something obviously wrong? How can I get this going?
Originaly the build directory was linked to a folder that didn't
exist.... (Renamed to badbuild)
ls /lib/modules/2.6.12-1.1447_FC4/ -l
total 1048
lrwxrwxrwx 1 root root 47 Sep 4 09:13 badbuild ->
../../../usr/src/kernels/2.6.12-1.1447_FC4-i686
lrwxrwxrwx 1 root root 24 Sep 4 16:39 build ->
/usr/src/redhat/SOURCES/
drwxr-xr-x 9 root root 4096 Sep 4 09:13 kernel
-rw-r--r-- 1 root root 195101 Sep 4 10:23 modules.alias
-rw-r--r-- 1 root root 69 Sep 4 10:23 modules.ccwmap
-rw-r--r-- 1 root root 234261 Sep 4 10:23 modules.dep
-rw-r--r-- 1 root root 813 Sep 4 10:23 modules.ieee1394map
-rw-r--r-- 1 root root 357 Sep 4 10:23 modules.inputmap
-rw-r--r-- 1 root root 16284 Sep 4 10:23 modules.isapnpmap
-rw-r--r-- 1 root root 169814 Sep 4 10:23 modules.pcimap
-rw-r--r-- 1 root root 89255 Sep 4 10:23 modules.symbols
-rw-r--r-- 1 root root 268974 Sep 4 10:23 modules.usbmap
lrwxrwxrwx 1 root root 5 Sep 4 09:13 source -> build
After installing the relevant kernel src rpm, I linked the 'build'
directory to that. (I think).
ls /usr/src/redhat/SOURCES/
COPYING.modules
gamin-0.0.25.tar.gz
genkey
kernel-2.6.12-i586.config
kernel-2.6.12-i686.config
kernel-2.6.12-i686-smp.config
kernel-2.6.12-i686-xen0.config
kernel-2.6.12-i686-xenU.config
kernel-2.6.12-ia64.config
kernel-2.6.12-ppc64.config
kernel-2.6.12-ppc64iseries.config
kernel-2.6.12-ppc.config
etc etc etc.
*Running btsco produces this. (I can't load the snd_bt_sco module so I
think this is the problem!)
> btsco 00:0D:44:0B:AA:A8
Error: hwdep next device (hw:0): Operation not permitted
Error: control open (hw:1): No such file or directory
Error: Can't find device. Bail
Also, This is the kernel src rpm I installed. Perhaps this is wrong/not
needed?
kernel-2.6.12-1.1447_FC4.src.rpm
And kernel is:
uname -r
2.6.12-1.1447_FC4
Installed blue packages are:
rpm -qa |grep blue
bluez-pin-0.24-2
gnome-bluetooth-devel-0.5.1-12
gnome-bluetooth-libs-0.5.1-12
bluez-libs-devel-2.15-1
gnome-bluetooth-0.5.1-12
bluez-utils-2.15-7
bluez-bluefw-1.0-6
bluez-libs-2.15-1
bluez-hcidump-1.18-1
Any help appreciated.
ATB
Michael.
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users