From: maca02@atlas.cz
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] problems pairing with Nokia 3650
In-Reply-To: <73d8c3bd2463806fbd0544eec8b00c2b@www1.mail.volny.cz>
Message-ID: <Pine.LNX.4.55.0309152052130.4567@maca.fortech.cz>
References: <73d8c3bd2463806fbd0544eec8b00c2b@www1.mail.volny.cz>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=iso-8859-2
Sender: bluez-users-admin@lists.sourceforge.net
Errors-To: bluez-users-admin@lists.sourceforge.net
Date: Mon, 15 Sep 2003 20:55:40 +0200 (CEST)


It seems I have the same problem with my SE T68i. Even the configuring
hcid without the pairing did not help. Pairing always fails. I rebuild th=
e
python pairing script (included in some bluez package).

Can anyone help? Thanks

Maca


On Mon, 15 Sep 2003, Jiri Prazak wrote:

> Hello all,
>
> I have RedHat 8, I have upgraded the kernel to version
> 2.4.20-19.8 and it is running on a Dell Latitude Notebook with
> BlueTake BT007 bluetooth adapter.
>
> It seems that I have somewhat succesfully installed and
> configured BlueZ stack on it, hcitool can see my Nokia3650, I can
> ping it, rfcomm binds it but I cannot pair the two for my life.
>
> 1.  Pairing initiated from the phone.  My phone finds
> "mynotebook"  when I select New paired device, it reports
> "waiting for mynotebook" and then it says "unable to pair with
> mynotebook" without ever asking for pin or anything.  The hcidump
> is as follows
>
> > HCI Event: Connect Request(0x04) plen 10
> < HCI Command: Accept Connection Request(0x01|0x0009) plen 7
> > HCI Event: Command Status(0x0f) plen 4
> > HCI Event: Connect Complete(0x03) plen 11
> > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7
> < HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
> > HCI Event: Command Status(0x0f) plen 4
> > HCI Event: Connection Packet Type Changed(0x1d) plen 5
> > ACL data: handle 0x0029 flags 0x02 dlen 12
>     L2CAP(s): Connect req: psm 1 scid 0x0045
> < ACL data: handle 0x0029 flags 0x02 dlen 16
>     L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0045 result 2
> status 0 > HCI Event: Number of Completed Packets(0x13) plen 5
> > HCI Event: Max Slots Change(0x1b) plen 3
> > HCI Event: Disconn Complete(0x05) plen 4
>
> I cannot make any sense out of this but I see no errors.
>
> 2. Pairing initiated from "mynotebook".  I use rfcomm connect
> btaddress and the phone asks for a pin, I type in the pin
> (correct one) and I get either
>
> * connection refused
>
> or
>
> * Can't connect RFCOMM socket: Resource temporarily unavailable
>
> on the terminal.  Obviously if this does not work I cannot use
> gprs and pppd either.  Interesting thing is that before I try
> connecting using pppd rfcomm says the channel is clean and after
> the thing bombs it reports channel closed.  I really have no idea
> where the problem is, I tinkered with hci.conf and such but
> nothing seems to help, even disabling authentication has no
> effect.  First I thought it was going to be a minor config issue
> since the phone is visible but I'm not sure anymore.  Any help
> and advice is appreciated.
>
> Thanks Jirka
>
> --
> Vyhraj Ford Fiesta s klimatizac=ED a dal=B9=ED ceny!
> V=EDce na http://soutez.volny.cz
>
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>
>
>


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users