Return-Path: Subject: Re: [Bluez-users] New to the headset club :) From: Marcel Holtmann To: Nils Faerber Cc: BlueZ Mailing List In-Reply-To: <1065537273.29878.613.camel@idoru.kc.de> References: <1065537273.29878.613.camel@idoru.kc.de> Content-Type: text/plain Message-Id: <1065539062.5470.79.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Id: List-Unsubscribe: , List-Archive: Date: 07 Oct 2003 17:04:16 +0200 Hi Nils, > and the headset beeps a single time. > After that nothing obvious happens anymore. > What does the AT command mean? It seems to come from the headset, right? > Would hstest need to respond at least with OK? forgot something :( You must make sure that your local device routes the SCO traffic of the HCI interface. If your local device is CSR based, the CVS version of hciconfig can show you this. # hciconfig hci0 revision hci0: Type: USB BD Address: 00:50:xx:xx:xx:xx ACL MTU: 192:8 SCO MTU: 64:8 HCI 16.1.1 Chip version: BlueCore02 Max key size: 128 bit SCO mapping: HCI Regards Marcel ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users