Return-Path: Subject: Re: [Bluez-users] help for bluez and bridge configuration needed From: Marcel Holtmann To: Paulo Marques Cc: theo.beisch@gmx.de, BlueZ Mailing List In-Reply-To: <3F82A016.2050901@grupopie.com> References: <200310062337.37090.root <>> <3F82A016.2050901@grupopie.com> Content-Type: text/plain Message-Id: <1065526456.5327.45.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Id: List-Unsubscribe: , List-Archive: Date: 07 Oct 2003 13:34:10 +0200 Hi, > The problem is that when the bnep0 interface enters the bridge, the bridge's > "mac address" changes. You can see that happening doing a "ifconfig pan0" before > the bnep0 joining the bridge and after, to see the hardware address of the pan0 > interface. > > I tried to solve this by issuing "arping's" so that other machines on the > network would be warned about the new hardware address, but unfortunately never > got this to work properly... :( I never put the eth0 into the bridge ;) You can use IP forwarding and NAT between eth0 und pan0. Regards Marcel ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users