Return-Path: Subject: Re: [Bluez-users] hci0 problem after timeout From: Marcel Holtmann To: Rafael Vidal Aroca Cc: BlueZ Mailing List In-Reply-To: <4017D6E9.6030700@3WT.com.br> References: <40170986.70105@3WT.com.br> <1075276651.12766.52.camel@pegasus> <4017D6E9.6030700@3WT.com.br> Content-Type: text/plain Message-Id: <1075306737.26729.3.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 28 Jan 2004 17:18:57 +0100 Hi Rafael, > root@gemini:~# hciconfig -a > hci0: Type: USB > BD Address: 00:80:C8:50:F2:D5 ACL MTU: 377:10 SCO MTU: 16:0 > UP RUNNING PSCAN ISCAN > RX bytes:63 acl:0 sco:0 events:7 errors:0 > TX bytes:27 acl:0 sco:0 commands:7 errors:0 > Features: 0xff 0xfd 0x05 0x00 0x00 0x00 0x00 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: > Link mode: SLAVE ACCEPT > Name: 'Broadcom BCM2033' > Class: 0x000000 > Service Classes: Unspecified > Device Class: Miscellaneous, > HCI Ver: 1.1 (0x1) HCI Rev: 0x2 LMP Ver: 1.1 (0x1) LMP Subver: > 0x1007 > Manufacturer: Broadcom Corporation (15) maybe it is this Broadcom device or maybe it is your USB chipset. What host driver do you use? usb-uhci or uhci? Try the other one. If you have access to a CSR donlge please try this. Regards Marcel ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users