Return-Path: Subject: Re: [Bluez-users] Config for Socket CF card From: Marcel Holtmann To: Max Krasnyansky Cc: digger vermont , BlueZ Mailing List , Benjamin Herrenschmidt In-Reply-To: <1074818667.1733.27.camel@localhost> References: <1074566227.3670.24.camel@myrna> <1074597777.7088.2.camel@pegasus> <1074697933.3020.19.camel@myrna> <1074698544.7088.102.camel@pegasus> <1074749699.2573.17.camel@myrna> <1074775827.3071.1.camel@pegasus> <1074814697.3159.3.camel@myrna> <1074816664.3071.60.camel@pegasus> <1074818667.1733.27.camel@localhost> Content-Type: text/plain Message-Id: <1074819483.3071.79.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 23 Jan 2004 01:58:03 +0100 Hi Max, > I can confirm that. Xircom PC cards don't work with 2.6 anymore. > Everything seems to be ok. Serial driver recognizes UART, creates a > port, etc. But hciattach always times out and I see only one or two > interrupts on that port. Unfortunately I don't have much more details > than that, didn't have time to investigate. I tried simple stuff like > different baud rate, reset, different interrupts (ie setserial) etc. > Nothing works. I checked it with my Xircom some hours ago and yes, it don't works. I have no explanation for that, so someone should write all this up and prepare a post for the Linux serial mailing list and notify Rusty Russel about it. Digger, will you do this? Regards Marcel ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users