Subject: Re: [Bluez-users] Socket CF card problems
From: Marcel Holtmann <marcel@holtmann.org>
To: Gene Imes <ebi7@ozob.net>
Cc: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
In-Reply-To: <1073341923.6567.20.camel@tr1a.ozob.net>
References: <3FF9CA56.1060205@Fampeeters.com>
	 <1073341923.6567.20.camel@tr1a.ozob.net>
Content-Type: text/plain
Message-Id: <1073344171.2508.29.camel@pegasus>
Mime-Version: 1.0
Sender: bluez-users-admin@lists.sourceforge.net
Errors-To: bluez-users-admin@lists.sourceforge.net
Date: Tue, 06 Jan 2004 00:09:31 +0100

Hi Gene,

> I apologize if this is too lengthy, but I need some help.
> 
> I am running a 2.6.0 kernel and I am trying to get a Socket CF card
> running.
> 
> root@tr1a:~# ver
> Linux version 2.6.1-rc1-mm1 (root@tr1a) (gcc version 3.3.2 20031218
> (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #5 Mon Jan 5 10:54:39 CST 2004
> 
> cardctl shows:
> 
> root@tr1a:~# cardctl ident
> Socket 0:
>   product info: "Socket", "CF+ Personal Network Card Rev 2.5"
>   manfid: 0x0104, 0x0096
>   function: 2 (serial)
> 
> According to http://www.holtmann.org/linux/bluetooth/devices.html this
> card is 'working'.
> 
> My /usr/src/linux/.config file looks like this:
> 
> ...
> CONFIG_BT=m
> CONFIG_BT_L2CAP=m
> CONFIG_BT_SCO=m
> CONFIG_BT_RFCOMM=m
> CONFIG_BT_RFCOMM_TTY=y
> CONFIG_BT_BNEP=m
> CONFIG_BT_BNEP_MC_FILTER=y
> CONFIG_BT_BNEP_PROTO_FILTER=y
>                                                                                                                              
> #
> # Bluetooth device drivers
> #
> # CONFIG_BT_HCIUSB is not set
> CONFIG_BT_HCIUART=m
> CONFIG_BT_HCIUART_H4=y
> CONFIG_BT_HCIUART_BCSP=y
> # CONFIG_BT_HCIUART_BCSP_TXCRC is not set
> # CONFIG_BT_HCIDTL1 is not set
> # CONFIG_BT_HCIBT3C is not set
> # CONFIG_BT_HCIBLUECARD is not set
> CONFIG_BT_HCIBTUART=m
> CONFIG_BT_HCIVHCI=m
> # CONFIG_KGDBOE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NETPOLL_RX is not set
> # CONFIG_NETPOLL_TRAP is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> 
> ...
> CONFIG_SERIAL_8250=m
> CONFIG_SERIAL_8250_CS=m
> # CONFIG_SERIAL_8250_ACPI is not set
> CONFIG_SERIAL_8250_NR_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
> 
> When I insert the Socket card (which is of course itself inserted in a
> pcmcia adapter) I get this:
> 
> root@tr1a:~# lsmod
> Module                  Size  Used by
> serial_cs               9352  1
> 8250                   21280  3 serial_cs
> 
> I guess this is proper.
> 
> And then:
> 
> root@tr1a:~# dmesg
> ...
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
> disabled
> ttyS0 at I/O 0x3f8 (irq = 5) is a 16C950/954
> 
> So I issue:
> 
> root@tr1a:/boot# hciattach /dev/ttyS0 any 115200

I prefer that you use "hciattach ttyS0 socket".

Regards

Marcel


-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users