Return-Path: From: ALBERT RIBAS GUASCH To: BlueZ Mailing List Message-id: <8d7248bf39.8bf398d724@estudiants.urv.es> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Subject: [Bluez-users] rfcomm connection refused / Host is down (Again) Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 31 Mar 2004 00:02:37 +0200 Hi! I'm using the BlueZ stack in kernel 2.4.24, and I've got an usb dongle and I try to connect to an RS232-bluetooth attached to a robot's serial port. So, I do hciconfig and I get hci0: Type: USB BD Address: 00:0A:3A:50:20:15 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:8280 acl:233 sco:0 events:233 errors:0 TX bytes:3096 acl:93 sco:0 commands:45 errors:0 When I do an hcitool -i hci0 inq, I can find the RS232 adapter, but on doing rfcomm -i hci0 connect /dev/rfcomm0 00:c0:1B:05:C8:2A 1 I get a message with: Can't connect RFCOMM socket: Connection refused or either: Can't connect RFCOMM socket: Host is down Tom Chiverton asked if were the devices already paired.What do I need to do to pair the devices? Oh! one more thing, if I do rfcomm -i hci0 bind /dev/rfcomm0 00:c0:1B:05:C8:2A 1 The two devices get binded, but I'm still not capable to connect them!!!! Can you help me?? Tank you!!!!!! Albert Thank you ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users