Return-Path: To: "BlueZ Mailing List" Subject: Re: [Bluez-users] timeout after rfcomm or pan connection References: <20040309161702.24407.qmail@web40713.mail.yahoo.com> <1078882388.30990.24.camel@pegasus> From: "Christoph Torens" Content-Type: text/plain; format=flowed; delsp=yes; charset=iso-8859-15 MIME-Version: 1.0 Message-ID: In-Reply-To: <1078882388.30990.24.camel@pegasus> Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 15 Mar 2004 13:08:25 +0100 Hi again, it's been a few days since my last mail, hope you remeber some facts from it. I managed to get one Acer 500 BT-Dongle with CSR chipset. I also upgraded to Kernel 2.4.21 this is the latest kernel i can get from the vendor (this is "arcom" if anyone knows them the embedded pc is a: "Viper Embedded Linux Development Kit") and now I have the following situation: root@viper root# hciconfig -a hci0: Type: USB BD Address: 00:60:57:0C:88:1A ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:1810 acl:0 sco:0 events:17 errors:0 TX bytes:299 acl:0 sco:0 commands:13 errors:0 Features: 0xff 0xff 0x0b 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'BlueZ (0) on viper' Class: 0x000100 Service Classes: Unspecified Device Class: Computer, Uncategorized HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: 0x175 Manufacturer: Cambridge Silicon Radio (10) root@viper root# pand --search -Q 20 --service NAP -n pand[315]: PAN daemon ver 1.1 pand[315]: Inquiring pand[315]: Searching for NAP on 00:04:3E:C0:9D:79 pand[315]: Connecting to 00:04:3E:C0:9D:79 pand[315]: bnep0 connected root@viper root# hciconfig -a hci0: Type: USB BD Address: 00:60:57:0C:88:1A ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:2380 acl:9 sco:0 events:37 errors:0 TX bytes:495 acl:9 sco:0 commands:19 errors:0 Features: 0xff 0xff 0x0b 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'BlueZ (0) on viper' Class: 0x000100 Service Classes: Unspecified Device Class: Computer, Uncategorized HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: 0x175 Manufacturer: Cambridge Silicon Radio (10) root@viper root# ifconfig -a bnep0 Link encap:Ethernet HWaddr 00:60:57:0C:88:1A BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:80:66:10:04:40 inet addr:192.168.0.50 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1 RX packets:312 errors:1 dropped:0 overruns:1 frame:0 TX packets:642 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:37644 (36.7 KiB) TX bytes:316263 (308.8 KiB) Interrupt:1 Base address:0x9300 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:560 (560.0 B) TX bytes:560 (560.0 B) root@viper root# ifconfig bnep0 10.0.0.2 root@viper root# hciconfig -a hci0: Type: USB BD Address: 00:60:57:0C:88:1A ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:2657 acl:9 sco:0 events:40 errors:0 TX bytes:564 acl:12 sco:0 commands:22 errors:0 Features: 0xff 0xff 0x0b 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: HOLD SNIFF PARK Link mode: SLAVE ACCEPT Can't read local name on hci0. Connection timed out(110) root@viper root# ### as you can see... I get the bnep connection and the interface bnep0. i try to set an ip adress and ...the hci device crashes. any ideas? ifconfig works on the other side at my debian-PC. i have binary packages of bluez-libs provided by arcom bluez-pan is not provided by arcom, so i had to cross-compile bluez-libs, bluez-sdp and finally bluez-pan by the way, this is my student project (german: Studienarbeit) -- Regards, Christoph Torens ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users