Return-Path: Subject: Re: [Bluez-users] PAN From: Marcel Holtmann To: ALBERT RIBAS GUASCH Cc: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1083067127.28880.175.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 27 Apr 2004 13:58:47 +0200 Hi Albert, > I already have two computers to try the PAN on them > with two USB dongles, but I still have some problems. > > In one computer I run: > > modprobe bnep > hcid > pand --listen --role GN > > And in the other one: > modprobe bnep > hcid > pand --connect 00:0A:3A:50:20:3C > > then, I look at ifconfig (on both sides) and the > connection is ok for a while, but when I check > ifconfig again it has disappeared!! > > Then, If _I do a pand --show on the client side, I > see nothing, but on the master side, it is shown as > if the connection was still ok! > > Could you help me to mantain stable this connection?? try to use "ifconfig -a" so you also see unconfigured interfaces. Do you have somekind of DHCP running? What Bluetoth chip is on the Belkin dongles (check with "hciconfig -a")? Run "hcidump -w " as root on one machine and send us the binary dump file. Do you see any errors when calling dmesg? Regards Marcel ------------------------------------------------------- This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th! http://www.thinkgeek.com/freeshipping/?cpg=12297 _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users