From: Richard Cox <conardcox@earthlink.net>
Reply-To: rcox27@triad.rr.com
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Connection dropped or cannot connect (Solved!!!!!!)
References: <000801c41e98$9e75d080$0100a8c0@terre> <1081632356.5398.48.camel@pegasus> <200404111138.50546.conardcox@earthlink.net>
In-Reply-To: <200404111138.50546.conardcox@earthlink.net>
MIME-Version: 1.0
Content-Type: text/plain;
  charset="iso-8859-1"
Message-Id: <200404111146.47402.conardcox@earthlink.net>
Sender: bluez-users-admin@lists.sourceforge.net
Errors-To: bluez-users-admin@lists.sourceforge.net
Date: Sun, 11 Apr 2004 11:46:47 -0400

On Sunday 11 April 2004 11:38 am, Richard Cox wrote:
> On Saturday 10 April 2004 05:25 pm, Marcel Holtmann wrote:
> > Hi Richard,
> >
> > > " Do this adapter have the same problem? Is it CSR based?"
> > >
> > > Yes, according to the bluez hardware compatibilty list
> > > (http://www.holtmann.org/linux/bluetooth/devices.html) it says:
> > >
> > > Belkin F8T003 USB Adapter  	CSR  	1.1  	hci_usb  	working  	Nayib
> > > Kiuhan
> >
> > you are kidding ;) I actually know what's in my own list, but I wanna be
> > sure that the entry is correct. So check with "hciconfig -a".
> >
> > And "yes" means that the adapter is CSR based or that it have the same
> > problem.
> >
> > > I'll certainly try defining that macro you listed above and see what
> > > happens.
> >
> > Or you can remove these four lines:
> >
> > 	#ifndef CONFIG_BT_HCIUSB_ZERO_PACKET
> > 	#undef  URB_ZERO_PACKET
> > 	#define URB_ZERO_PACKET 0
> > 	#endif
> >
> > Regards
> >
> > Marcel
> >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.Net email is sponsored by: IBM Linux Tutorials
> > Free Linux tutorial presented by Daniel Robbins, President and CEO of
> > GenToo technologies. Learn everything from fundamentals to system
> > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> > _______________________________________________
> > Bluez-users mailing list
> > Bluez-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bluez-users
>
> Marcel,
>
> 	First, let me thank you for your patience with my questions!  Now, for the
> readers of this list, I'll let you know the secret to fixing this problem,
> at least for my setup:
>
> 	I downloaded the kernel patch from your website (patch-2.4.25-mh3.gz),
> saved by .config, did a 'make mrproper', restored the .config, rebuilt the
> kernel, rebooted and... and that fixed my problems.  I run a Gentoo system
> with a 'vanilla' 2.4.25 kernel, so the patch for the toplevel Makefile
> failed, but that didn't matter since it only affected the 'EXTRAVERSION'
> macro, which the vanilla kernel does not set.
>
> 	Since I applied that patch and rebuilt the kernel, I've been surfing the
> web, listening to streaming media on my iPaq, etc for the past hour without
> a single disconnect!  Outstanding!  Before I patched, I couldn't do
> anything like this for more than 5 minutes before I would get the error
> that required removal of the usb dongle.  Anyone experiencing this
> particular problem should try that patch out before giving up.
>
> Best Wishes
>
> Richard
>
*Sigh*

Seems I spoke too soon 8^(  As soon as I sent this, it disconnected again.  I 
should have waited a bit longer to post I suppose.  Nevertheless, for some 
reason, it went much longer without this error this time....I'll keep trying.

Richard


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users