Return-Path: Subject: Re: [Bluez-users] hci_uart and Ambicom BT2000E From: Marcel Holtmann To: Daniel Jimenez Cc: BlueZ Mailing List In-Reply-To: <4075EAF9.8060801@pobox.com> References: <40743AAE.4070808@pobox.com> <1081418373.2970.6.camel@pegasus> <4075EAF9.8060801@pobox.com> Content-Type: text/plain Message-Id: <1081534461.26610.15.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 09 Apr 2004 20:14:21 +0200 Hi Daniel, > > you should check how many hcid you have running. There must only be one. > > Do you mean by doing hciconfig -a? I only see one interface that way. check it with "ps x". > > The other problem is that not every serial based PCMCIA card works right > > now with the 2.6 kernel. Some do and some don't and actually this is a > > problem in the serial subsystem, but I don't know where. > > Interesting and disappointing. I bought this card because I thought it > worked based on the hardware list :(. What can I do to find out if it's > the card? I tested a Pretec card with an Ericsson chip on it and the card don't works either, but sometimes I get some bytes. I don't have enough time to dig deeper into it, but it must be possible to use these cards with serial_cs and hci_uart. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users