Return-Path: Subject: Re: [Bluez-users] hci_uart and Ambicom BT2000E From: Marcel Holtmann To: Daniel Jimenez Cc: BlueZ Mailing List In-Reply-To: <40743AAE.4070808@pobox.com> References: <40743AAE.4070808@pobox.com> Content-Type: text/plain Message-Id: <1081418373.2970.6.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 08 Apr 2004 11:59:33 +0200 Hi Daniel, > In a previous thread Marcell recommended I use serial_cs and hci_uart > for my Ambicom PCMCIA bluetooth adaptor. > > I've got serial_cs working, and it's created device /dev/ttyS1. > > I did a hciattach /dev/ttyS1 ericsson and that returned no errors/notices. > > hciconfig hci0 up hangs and does nothing. I can control+c out of it. > > I do notice this in /var/log/messages: > > hcid[6522]: HCI dev 0 registered > hcid[6437]: HCI dev 0 registered > hcid[6295]: HCI dev 0 registered > hcid[7097]: Can't init device hci0. Connection timed out(110) > hcid[7098]: Can't init device hci0. Connection timed out(110) > hcid[7099]: Can't init device hci0. Connection timed out(110) you should check how many hcid you have running. There must only be one. The other problem is that not every serial based PCMCIA card works right now with the 2.6 kernel. Some do and some don't and actually this is a problem in the serial subsystem, but I don't know where. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users