Return-Path: From: Alex To: Marcel Holtmann Subject: Re: [Bluez-users] Error message Date: Fri, 21 May 2004 20:51:07 +0200 References: <200405211611.38038.welpan@gmx.de> <200405211940.07538.welpan@gmx.de> <1085161340.22191.32.camel@pegasus> In-Reply-To: <1085161340.22191.32.camel@pegasus> Cc: bluez-users@lists.sourceforge.net MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Message-Id: <200405212051.07773.welpan@gmx.de> List-ID: Am Freitag, 21. Mai 2004 19:42 schrieben Sie: > Hi Alex, > > > > there is no CSR chip in this dongle. > > > > KMelektronik cheat, thats not fine. > > yes they did. Where do you bought it? If the error still exists after > disabling SCO support I must try to get one of these. > > > > What is the content of /proc/bus/usb/devices with the dongle attached? > > > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > I: If#= 1 Alt= 1 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=hci_usb > > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > You missed some information at the top. > > > > > Kernel with Bluez-modules and USB drivers > > > > > > Use patch-2.6.6-mh1 to prevent some USB related bugs. > > > > I use the patch ( I did it like the description), so that was my last > > hope to find the error by myself > > If you already use 2.6.6-mh1 then it is good to say that ;) > > However disable CONFIG_BT_HCIUSB_SCO and try again. That was it, the dongle is running. Thank you very much for your help. Best Regards Alex