Return-Path: Subject: Re: [Bluez-users] Error message From: Marcel Holtmann To: Alex Cc: BlueZ Mailing List In-Reply-To: <200405211940.07538.welpan@gmx.de> References: <200405211611.38038.welpan@gmx.de> <200405211909.59769.welpan@gmx.de> <1085160363.22191.24.camel@pegasus> <200405211940.07538.welpan@gmx.de> Content-Type: text/plain Message-Id: <1085161340.22191.32.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 21 May 2004 19:42:20 +0200 Hi Alex, > > there is no CSR chip in this dongle. > > KMelektronik cheat, thats not fine. yes they did. Where do you bought it? If the error still exists after disabling SCO support I must try to get one of these. > > What is the content of /proc/bus/usb/devices with the dongle attached? > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=hci_usb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms You missed some information at the top. > > > Kernel with Bluez-modules and USB drivers > > > > Use patch-2.6.6-mh1 to prevent some USB related bugs. > > I use the patch ( I did it like the description), so that was my last hope to > find the error by myself If you already use 2.6.6-mh1 then it is good to say that ;) However disable CONFIG_BT_HCIUSB_SCO and try again. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users