Return-Path: From: Alex To: Marcel Holtmann Subject: Re: [Bluez-users] Error message Date: Fri, 21 May 2004 19:40:07 +0200 References: <200405211611.38038.welpan@gmx.de> <200405211909.59769.welpan@gmx.de> <1085160363.22191.24.camel@pegasus> In-Reply-To: <1085160363.22191.24.camel@pegasus> Cc: bluez-users@lists.sourceforge.net MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Message-Id: <200405211940.07538.welpan@gmx.de> List-ID: Am Freitag, 21. Mai 2004 19:26 schrieben Sie: > Hi Alex, > > > > this looks very weird. Give us more information about your hardware and > > > what kind of dongle you are using. > > > > Dongle : with CSR Chip, Seller WIDCOMM > > > > hciconfig -a > > hci0: Type: USB > > BD Address: 08:00:17:13:82:61 ACL MTU: 339:4 SCO MTU: 60:9 > > UP RUNNING PSCAN ISCAN > > RX bytes:128797 acl:0 sco:37800 events:14 errors:0 > > TX bytes:300 acl:0 sco:0 commands:13 errors:0 > > Features: 0xff 0x3a 0x05 0x00 0x00 0x00 0x00 0x00 > > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > > Link policy: HOLD SNIFF PARK > > Link mode: SLAVE ACCEPT > > Name: 'welpix-0' > > Class: 0x000100 > > Service Classes: Unspecified > > Device Class: Computer, Uncategorized > > HCI Ver: 1.1 (0x1) HCI Rev: 0x178 LMP Ver: 1.1 (0x1) LMP Subver: > > 0x178 Manufacturer: RTX Telecom A/S (21) > > there is no CSR chip in this dongle. KMelektronik cheat, thats not fine. > > > System: AMD Duron 1600 > > ASROCK Motherboard with SIS USB-Controller > > What is the content of /proc/bus/usb/devices with the dongle attached? E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.6 ohci_hcd S: Product=Silicon Integrated Systems [SiS] USB 1.0 Controller S: SerialNumber=0000:00:03.0 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=82(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > Kernel with Bluez-modules and USB drivers > > Use patch-2.6.6-mh1 to prevent some USB related bugs. I use the patch ( I did it like the description), so that was my last hope to find the error by myself In KDE Shell I cannot plug in, plug out, plug in the dongle, is only found by the first attemp. > > Regards > > Marcel Best Regards Alex