Return-Path: Message-ID: <40AB4D9F.7010307@telus.net> From: Ken MIME-Version: 1.0 To: bluez-users@lists.sourceforge.net Content-Type: text/plain; charset=us-ascii; format=flowed Subject: [Bluez-users] rfcomm confusion Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 19 May 2004 05:05:51 -0700 I am trying to create a bluetooth serial connection between my linux laptop and iPAQ pda. I'm using the command "rfcomm connect hci0 00:11:22:33 1" and it appears to work. the connection shows up on the iPAQ and when I go to the status it displays 0 bytes transfered - 0 bytes received. so, now i'm trying to send some data over this connection. my expectation was that i could do something like: echo "test" > /dev/rfcomm0 and then see 4 bytes received on the iPAQ interface, however the byte counts on the ipaq remain 0. does it make sense to try and send data this way? if not, can anybody suggest how i should be trying to send data over an rfcomm connection? thanks! ken ------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users