Return-Path: Subject: Re: [Bluez-users] Nokia 6230: "pairing and conn. rejected for security reasons" From: Marcel Holtmann To: Lutz Pressler Cc: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1084872149.5833.72.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 18 May 2004 11:22:30 +0200 Hi Lutz, > Requesting information ... > BD Address: 00:E0:03:39:C9:AB > Device Name: Nokia 6230 LP > LMP Version: 1.1 (0x1) LMP Subversion: 0x380 > Manufacturer: Cambridge Silicon Radio (10) > Features: 0xbf 0xee 0x00 0x09 > <3-slot packets> <5-slot packets> > > > please install bluez-libs-2.7 and bluez-utils-2.7, because it looks like that this phone already contains some Bluetooth 1.2 features and I need to know the full 8 bytes of the remote features. > HCIDump - HCI packet analyzer ver 1.8 > device: hci0 snap_len: 1028 filter: 0xffffffff > > HCI Event: Connect Request(0x04) plen 10 > AB C9 39 03 E0 00 04 02 52 01 > < HCI Command: Accept Connection Request(0x01|0x0009) plen 7 > AB C9 39 03 E0 00 01 > > HCI Event: Command Status(0x0f) plen 4 > 00 01 09 04 > > HCI Event: PIN Code Request(0x16) plen 6 > AB C9 39 03 E0 00 > < HCI Command: PIN Code Request Reply(0x01|0x000d) plen 23 > AB C9 39 03 E0 00 05 38 34 37 37 31 00 00 00 00 00 00 00 00 > 00 00 00 > > HCI Event: Command Complete(0x0e) plen 10 > 01 0D 04 00 AB C9 39 03 E0 00 > > HCI Event: Link Key Notification(0x18) plen 23 > AB C9 39 03 E0 00 0F B5 F9 09 4B CC 34 47 B7 91 18 71 5F 0B > D8 A3 01 > > HCI Event: Connect Complete(0x03) plen 11 > 00 00 00 AB C9 39 03 E0 00 01 00 You made a connection from the phone to your PC, right? And it looks like that you are in security mode 3. From your hcid.conf I saw that you haven't activated auth and encrypt so this is not you, but I can't think of that your phone uses security mode 3. This is not normal. > < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 > 00 00 0F 00 > > HCI Event: Command Complete(0x0e) plen 6 > 01 0D 08 00 00 00 > < HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4 > 00 00 18 CC > > HCI Event: Command Status(0x0f) plen 4 > 00 01 0F 04 > > HCI Event: Connection Packet Type Changed(0x1d) plen 5 > 00 00 00 18 CC > > HCI Event: Command Complete(0x0e) plen 3 > 01 00 00 > > HCI Event: Disconn Complete(0x05) plen 4 > 00 00 00 29 It disconnects with "Pairing With Unit Key Not Supported" error (0x29) and I haven't seen this error before. I am no link manager expert, but I really think that one implementation is acting very bad here. And I guess it is your Acer dongle with the Zeevo/Telencomm chip, because it has caused troubles in the past. Do you own another dongle (preferable CSR based) to check this? Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users