Return-Path: Subject: Re: [Bluez-users] Bluez+2.6+Logitech bluetooth From: Marcel Holtmann To: Di Pietro Nicolas Cc: BlueZ Mailing List In-Reply-To: <1084826611.10503.23.camel@darthvader.linuxkot.kap> References: <20040515163903.CB06543F94@rekin8.go2.pl> <20040516081059.46f1904b@bluez.bueche.ch> <1084708456.4184.0.camel@pegasus> <1084826611.10503.23.camel@darthvader.linuxkot.kap> Content-Type: text/plain Message-Id: <1084835041.5833.40.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 18 May 2004 01:04:01 +0200 Hi Nicolas, > Just to say to you that, I've tried the new hidd and hidp modules > (from a patched against patch-2.6.6-mh1 2.6.6 kernel) > but it change a few (the only thing that has changed is when I halt > or reboot the computer after have done hid2hci, there is no more > Ooops when stopping usb > > darthvader root # hidd > Can't open HIDP control socket: Address family not supported by protocol this shouldn't happen, because the kernel knows which module it has to load. > darthvader root # hidd --server > darthvader root # May 17 22:33:48 darthvader hidd[14177]: Bluetooth HID > daemon > darthvader root # > darthvader root # lsmod > > hidp 24000 0 > l2cap 20676 1 hidp > bluetooth 41124 2 hidp,l2cap This is problematic, because after the start of hidd, the hidp must hold a reference count of 2. Check the syslog for any errors. > darthvader root # hid2hci > Switching device 046d:c704 to HCI mode was successful > darthvader root # May 17 22:26:22 darthvader usb 2-2.2: new full speed > USB device using address 5 At this point hciconfig should report your device. > darthvader bluetooth # lsusb > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 005: ID 046d:c707 Logitech, Inc. > Bus 002 Device 004: ID 046d:c704 Logitech, Inc. > Bus 002 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical > Bus 002 Device 002: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 001: ID 0000:0000 The Bluetooth dongle hasn't changed from HID mode to HCI mode. > PS:Thank a lot for the bluez stack under Linux... > :Is it something right tha when I switch to hci the blue button on > the bt hub doesn't work anymore ??? Until I disconnect the hub and > reboot the computer How should it work if you are in HCI mode ;) Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users