Return-Path: Subject: Re: [Bluez-users] Can't understand From: Marcel Holtmann To: Hedin Cc: BlueZ Mailing List In-Reply-To: <200405121820.59166.andrewthegreat@mail.ru> References: <200405121820.59166.andrewthegreat@mail.ru> Content-Type: text/plain Message-Id: <1084367829.25099.16.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 12 May 2004 15:17:09 +0200 Hi Hedin, > I have Redhat 9.0 with 2.6.6-mh1 patched kernel and all modules compiled. > I have Tecom BT3030 Dongle. > > I compiled bluez-libs-2.7 and bluez-utils-2.7. After some effort (big effort!) > I managed to compile bluez-pin (why is it needed - no word anywhere...). > > I also installed all other modules without problems, except bluez-bluefw. It > gives following errors: the bluez-bluefw was never ported to work on 2.6 systems. You can use the bcm203x firmware loader driver instead. For some more information take a look here http://www.bluez.org/drivers.html Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users