Return-Path: Subject: Re: [Bluez-users] can't establish a connection From: ben4fun To: bluez-users mailing list In-Reply-To: <200408060216.05030.cijoml@volny.cz> References: <1091742606.6143.17.camel@localhost> <1091747064.6143.25.camel@localhost> <1091748133.20839.63.camel@pegasus> <200408060216.05030.cijoml@volny.cz> Content-Type: multipart/alternative; boundary="=-cyvUB1lxshuMBwgUxZBX" Message-Id: <1091810383.4570.14.camel@localhost> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 06 Aug 2004 18:39:45 +0200 --=-cyvUB1lxshuMBwgUxZBX Content-Type: text/plain Content-Transfer-Encoding: 7bit Hi, > add > > none /proc/bus/usb usbdevfs faults 0 0 > > into /etc/fstab > > then write > mount -a It's done. After a reboot, I did "mount -t usbdevfs none /proc/bus/usb" from the USB-howto . It confirmed me it was already mounted. But it is strange that /proc/bus/usb/device file is still empty. Then I did "hciconfig hci0 up" and I still have "Can't init device hci0. Connection timed out(110)" But the hciconfig message changed. It is now: "hci0: Type: USB BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN RX bytes:0 acl:0 sco:0 events:0 errors:0 TX bytes:6 acl:0 sco:0 commands:2 errors:0" No idea why I have so much difficulties with this dongle. Regards, Ben --=-cyvUB1lxshuMBwgUxZBX Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit Hi,

add 

none            /proc/bus/usb   usbdevfs faults                 0       0

into /etc/fstab

then write
mount -a

It's done.
After a reboot, I did "mount -t usbdevfs none /proc/bus/usb" from the USB-howto . It confirmed me it was already mounted. But it is strange that /proc/bus/usb/device file is still empty. Then I did "hciconfig hci0 up" and I still have "Can't init device hci0. Connection timed out(110)"

But the hciconfig message changed. It is now:

"hci0:   Type: USB
        BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
        DOWN
        RX bytes:0 acl:0 sco:0 events:0 errors:0
        TX bytes:6 acl:0 sco:0 commands:2 errors:0"

No idea why I have so much difficulties with this dongle.

Regards,

Ben

--=-cyvUB1lxshuMBwgUxZBX-- ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users