Return-Path: Subject: Re: [Bluez-users] can't establish a connection From: Marcel Holtmann To: ben4fun Cc: BlueZ Mailing List In-Reply-To: <1091742606.6143.17.camel@localhost> References: <1091742606.6143.17.camel@localhost> Content-Type: text/plain Message-Id: <1091746301.20839.60.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 06 Aug 2004 00:51:41 +0200 Hi Ben, > I have a bluetooth dongle (broadcom) which is recognised when I > plugged it. I think so because kdebluetooth says that an adaptor was > found. But I can't pair it to my mobile phone (SE T610). The dongle > doesn't recognise any incoming connection. > > I found on the mailing list archive the following command: " hciconfig > -a" this is what I obtained. I hope it could help. > > "hci0: Type: USB > BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 > DOWN > RX bytes:0 acl:0 sco:0 events:0 errors:0 > TX bytes:3 acl:0 sco:0 commands:1 errors:0 > Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > Packet type: DM1 DH1 HV1 > Link policy: > Link mode: SLAVE ACCEPT" > > I maybe should say that I have a mandrake 10.0 and the kernel 2.6.3. go on with "hciconfig hci0 up" and have fun with your dongle. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users