Subject: Re: [Bluez-users] Sending files from phone to ppc machine fails
From: Marcel Holtmann <marcel@holtmann.org>
To: Sjoerd Simons <sjoerd@spring.luon.net>
Cc: bluez-users@lists.sourceforge.net
In-Reply-To: <20040930161652.GA10170@spring.luon.net>
References: <20040930161652.GA10170@spring.luon.net>
Content-Type: text/plain
Message-Id: <1096563173.4371.5.camel@notepaq>
Mime-Version: 1.0
Sender: bluez-users-admin@lists.sourceforge.net
Errors-To: bluez-users-admin@lists.sourceforge.net
Date: Thu, 30 Sep 2004 18:52:53 +0200

Hi Sjoerd,

>   Since some time i've got an Ericsson T630. Sending files via obex from both
>   my ppc and x86 machine to the phone works fine. But from the phone i can only
>   send stuff to the x86. When sending to my powerbook the phone almost 
>   immediatly indicates ``connection failed''. 
> 
>   Both machines have the exact same hcid.conf and are running debian unstable.
>   Both run kernel 2.6.8, trying 2.6.8-mh2 on the ppc didn't make a difference
>   (although my bluetooth mouse started to work a lot better, very nice).
> 
>   hcidump -x shows the following when trying to send from the phone to the ppc:
>   > HCI Event: Connect Request (0x04) plen 10
>     75 3F 1D DE 0F 00 04 02 52 01 
>   < HCI Command: Accept Connection Request (0x01|0x0009) plen 7
>     75 3F 1D DE 0F 00 00 
>   > HCI Event: Command Status (0x0f) plen 4
>     00 01 09 04 
>   > HCI Event: Connect Complete (0x03) plen 11
>     1A 2C 00 75 3F 1D DE 0F 00 01 00 
> 
>   Then the phone shows  ``connetion failed'' and that's all there is :(
> 
>   Doing the same on the x86 box starts with:
>   > HCI Event: Connect Request (0x04) plen 10
>     75 3F 1D DE 0F 00 04 02 52 01 
>   < HCI Command: Accept Connection Request (0x01|0x0009) plen 7
>     75 3F 1D DE 0F 00 01 
>   > HCI Event: Command Status (0x0f) plen 4
>     00 01 09 04 
>   > HCI Event: Link Key Request (0x17) plen 6
>     75 3F 1D DE 0F 00 
>   < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
>     75 3F 1D DE 0F 00 0E 42 18 96 9C 4D 11 8A 5D 73 1B 58 3F 07 
>     4C BF 
>   > HCI Event: Command Complete (0x0e) plen 10
>     01 0B 04 00 75 3F 1D DE 0F 00 
>   > HCI Event: Connect Complete (0x03) plen 11
>     00 29 00 75 3F 1D DE 0F 00 01 01 
> 
> 
>   Any ideas what could be going wrong here ?

stop hidd and see if it works then.

Regards

Marcel


-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users