Return-Path: Subject: Re: [Bluez-users] hcitool scan ... From: Marcel Holtmann To: bluez-users@lists.sourceforge.net In-Reply-To: <200411301420.24512.wim.delvaux@adaptiveplanet.com> References: <200411291050.14799.wim.delvaux@adaptiveplanet.com> <200411291136.23173.wim.delvaux@adaptiveplanet.com> <1101724777.7463.31.camel@pegasus> <200411301420.24512.wim.delvaux@adaptiveplanet.com> Content-Type: text/plain Message-Id: <1101821436.9348.1.camel@notepaq> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 30 Nov 2004 14:30:36 +0100 Hi Wim, > > > > this depends on the Bluetooth chip and its firmware. Check this with > > > > hcitool and hciconfig. > > > > > > sorry for my BT ignorance but what option should I use and which > > > parameter presents Chip and Firmware ? > > > > hciconfig -a > > hciconfig hci0 revision > > hcitool info > > for the Ipaq it shows > /mnt/ramfs/tmp # hciconfig -a > hci0: Type: UART > BD Address: 00:02:C7:0D:85:96 ACL MTU: 128:8 SCO MTU: 64:8 > UP RUNNING PSCAN ISCAN AUTH > RX bytes:252 acl:0 sco:0 events:12 errors:0 > TX bytes:430 acl:0 sco:0 commands:11 errors:0 > Features: 0xff 0xff 0x05 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: HOLD SNIFF PARK > Link mode: SLAVE ACCEPT > Name: 'familiar' > Class: 0x120112 > Service Classes: Networking, Object Transfer > Device Class: Computer, Handheld > HCI Ver: 1.1 (0x1) HCI Rev: 0x72 LMP Ver: 1.1 (0x1) LMP Subver: 0x72 > Manufacturer: Cambridge Silicon Radio (10) > > /mnt/ramfs/tmp # hciconfig hci0 revision > hci0: Type: UART > BD Address: 00:02:C7:0D:85:96 ACL MTU: 128:8 SCO MTU: 64:8 > HCI 11.2 (bc01b) > > for the desktop is shows > buro:# hciconfig -a > hci0: Type: USB > BD Address: 00:60:57:02:71:A2 ACL MTU: 192:8 SCO MTU: 64:8 > UP RUNNING PSCAN ISCAN > RX bytes:4470825 acl:40078 sco:0 events:110377 errors:0 > TX bytes:14530648 acl:125164 sco:0 commands:1112 errors:0 > Features: 0xff 0xff 0x09 0x00 0x00 0x00 0x00 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: > Link mode: SLAVE ACCEPT > Name: 'buro-0' > Class: 0x000000 > Service Classes: Unspecified > Device Class: Miscellaneous, > HCI Ver: 1.1 (0x1) HCI Rev: 0xbc LMP Ver: 1.1 (0x1) LMP Subver: 0xbc > Manufacturer: Cambridge Silicon Radio (10) > > buro:# hciconfig hci0 revision > hci0: Type: USB > BD Address: 00:60:57:02:71:A2 ACL MTU: 192:8 SCO MTU: 64:8 > HCI 12.7 > Chip version: BlueCore01b > SCO mapping: PCM > > does that explain why hciconfig scan fails if they are connected ? actually you won't be happy with anything before HCI 16.4 firmware. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users