Return-Path: From: wim delvaux To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] hcitool scan ... References: <200411291050.14799.wim.delvaux@adaptiveplanet.com> <200411291136.23173.wim.delvaux@adaptiveplanet.com> <1101724777.7463.31.camel@pegasus> In-Reply-To: <1101724777.7463.31.camel@pegasus> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Message-Id: <200411301420.24512.wim.delvaux@adaptiveplanet.com> Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 30 Nov 2004 14:20:24 +0100 On Monday 29 November 2004 11:39, Marcel Holtmann wrote: > Hi Wim, > > > > > > > how is it possible that not all devices show up when doing a scan > > > > > > ? I have 3 devices, Ipaq, Desktop and Phone and only phone shows > > > > > > up even if ipaq and desktop have a running PAN connection ? > > > > > > > > > > maybe because of the running PAN connection. > > > > > > > > is that so ? does a bt connecter refuse to present itself when it > > > > has a connection ? > > > > > > this depends on the Bluetooth chip and its firmware. Check this with > > > hcitool and hciconfig. > > > > sorry for my BT ignorance but what option should I use and which > > parameter presents Chip and Firmware ? > > hciconfig -a > hciconfig hci0 revision > hcitool info for the Ipaq it shows /mnt/ramfs/tmp # hciconfig -a hci0: Type: UART BD Address: 00:02:C7:0D:85:96 ACL MTU: 128:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN AUTH RX bytes:252 acl:0 sco:0 events:12 errors:0 TX bytes:430 acl:0 sco:0 commands:11 errors:0 Features: 0xff 0xff 0x05 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'familiar' Class: 0x120112 Service Classes: Networking, Object Transfer Device Class: Computer, Handheld HCI Ver: 1.1 (0x1) HCI Rev: 0x72 LMP Ver: 1.1 (0x1) LMP Subver: 0x72 Manufacturer: Cambridge Silicon Radio (10) /mnt/ramfs/tmp # hciconfig hci0 revision hci0: Type: UART BD Address: 00:02:C7:0D:85:96 ACL MTU: 128:8 SCO MTU: 64:8 HCI 11.2 (bc01b) for the desktop is shows buro:# hciconfig -a hci0: Type: USB BD Address: 00:60:57:02:71:A2 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:4470825 acl:40078 sco:0 events:110377 errors:0 TX bytes:14530648 acl:125164 sco:0 commands:1112 errors:0 Features: 0xff 0xff 0x09 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT Name: 'buro-0' Class: 0x000000 Service Classes: Unspecified Device Class: Miscellaneous, HCI Ver: 1.1 (0x1) HCI Rev: 0xbc LMP Ver: 1.1 (0x1) LMP Subver: 0xbc Manufacturer: Cambridge Silicon Radio (10) buro:# hciconfig hci0 revision hci0: Type: USB BD Address: 00:60:57:02:71:A2 ACL MTU: 192:8 SCO MTU: 64:8 HCI 12.7 Chip version: BlueCore01b SCO mapping: PCM does that explain why hciconfig scan fails if they are connected ? > > Regards > > Marcel > > > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://productguide.itmanagersjournal.com/ > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users