Return-Path: Subject: Re: [Bluez-users] DBT-120 firmware upgrade From: Marcel Holtmann To: Pavel Ruzicka Cc: BlueZ Mailing List In-Reply-To: <200411272130.44783.pavouk@pavouk.org> References: <200411261152.29925.pavouk@pavouk.org> <200411271655.27322.pavouk@pavouk.org> <1101579731.27074.8.camel@pegasus> <200411272130.44783.pavouk@pavouk.org> Content-Type: text/plain Message-Id: <1101588637.27074.22.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 27 Nov 2004 21:50:37 +0100 Hi Pavel, > thanks for perfect explaining. you are welcome. > I have good news. I flashed my dongle, and she is not dead ;-) > > Dongle now starts in HID mode. I must switch her to HCI with hid2hci. > hid2hci says something, that it fails, but it works. I have probably old > version of this utility. This is a general problem with using libusb. The URB isn't finished, but the device already resets. So an error occurs, but this error can be ignored. > Dongle in HID mode lights with power LED, but in HCI is power LED off. > Second LED blinks in both modes. I know the LED stuff is weird. > # hciconfig hci0 revision > hci0: Type: USB > BD Address: 00:0D:88:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8 > Build 1586 > Chip version: BlueCore02 > Max key size: 128 bit > SCO mapping: HCI I assume this is HCI 18.2 firmware, but I am not quite sure. It is not in my list. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users