Return-Path: Message-ID: <2de46576041124081140dc74b7@mail.gmail.com> From: Manjunath Prabhu To: bluez-users@lists.sourceforge.net Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Subject: [Bluez-users] BT test mode operation Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 24 Nov 2004 21:41:50 +0530 hi marcel, can i configure my bt dongles to operate in test mode....and then conduct the loopback or transmitter tests. This is indicated in the HCI part of the specification....so is it possible to run these tests just with BT devices connected to host PC's, and not using a BT protocol analyser. If i buy a BT tester, then wouldn't my BT dongle be the DUT.... Also, if i buy a CATC-tracer/trainer, should I again buy a BT tester???? thanks and regards, manjunath ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users