Return-Path: Subject: Re: [Bluez-users] throughput query From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: <2de4657604112307276221ff99@mail.gmail.com> References: <2de4657604112307276221ff99@mail.gmail.com> Content-Type: text/plain Message-Id: <1101224463.27351.2.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 23 Nov 2004 16:41:03 +0100 Hi Manjunath, > I am using anycom bt dongles. i set up a bt connection with pan/bnep. > i use i-perf to measure the throughput ..and i get abt 620kbps. I then > change to DH5 packet and measure the throughput.....and it is abt > 300kbps. Is this because of asymmetric and symmetric channels > respectively. > logically,use of DM packets gives a lower througput compared to DH packets. how often must I say this? Don't change the packet types. Enable all of them and let the link manager select the best one. > How is that hcitool is able to set the packet type in a connection? See above. > Isn't there some sort of communication with the LM and baseband?? What do you mean? > Similarly, can't i change the transmit power level??? No, you can't change that. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users