Return-Path: Subject: Re: [Bluez-users] Network Access Point - pairing problem From: Marcel Holtmann To: "D.W." Cc: BlueZ Mailing List In-Reply-To: <7166.1099563749@www18.gmx.net> References: <7166.1099563749@www18.gmx.net> Content-Type: text/plain Message-Id: <1099566332.7022.12.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 04 Nov 2004 12:05:32 +0100 Hi Daniel, > this is the output when I execute hciconfig -a. > hci0: Type: USB > BD Address: 00:02:5B:01:21:14 ACL MTU: 192:8 SCO MTU: 64:8 > UP RUNNING PSCAN ISCAN > RX bytes:936 acl:0 sco:0 events:23 errors:0 > TX bytes:327 acl:0 sco:0 commands:22 errors:0 > Features: 0xff 0xff 0x0f 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: HOLD SNIFF PARK > Link mode: ACCEPT MASTER > Name: 'BlueZ (0)' > Class: 0x000100 > Service Classes: Unspecified > Device Class: Computer, Uncategorized > HCI Ver: 1.1 (0x1) HCI Rev: 0x110 LMP Ver: 1.1 (0x1) LMP Subver: 0x110 > Manufacturer: Cambridge Silicon Radio (10) you forcing a role switch (master role), but you aren't allowing it in the link policy? Fix this. > This is the output while trying to connect to the NAP at first contact: > > HCIDump - HCI packet analyzer ver 1.5 > device: hci0 snap_len: 1028 filter: 0xffffffff > > HCI Event: Connect Request(0x04) plen 10 > B0 3A 4C 3D 0F 00 04 01 52 01 > < HCI Command: Accept Connection Request(0x01|0x0009) plen 7 > B0 3A 4C 3D 0F 00 00 > > HCI Event: Command Status(0x0f) plen 4 > 00 01 09 04 > > HCI Event: Role Change(0x12) plen 8 > 00 B0 3A 4C 3D 0F 00 00 > > HCI Event: Connect Complete(0x03) plen 11 > 00 28 00 B0 3A 4C 3D 0F 00 01 00 > < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 > 28 00 0E 00 > > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 > B0 3A 4C 3D 0F 00 01 > > HCI Event: Max Slots Change(0x1b) plen 3 > 28 00 05 > > HCI Event: Command Complete(0x0e) plen 6 > 01 0D 08 00 28 00 > < HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4 > 28 00 18 CC > > HCI Event: Command Status(0x0f) plen 4 > 00 01 0F 04 > > HCI Event: Connection Packet Type Changed(0x1d) plen 5 > 00 28 00 18 CC > > HCI Event: PIN Code Request(0x16) plen 6 > B0 3A 4C 3D 0F 00 > < HCI Command: PIN Code Request Reply(0x01|0x000d) plen 23 > B0 3A 4C 3D 0F 00 05 42 6C 75 65 5A 00 00 00 00 00 00 00 00 > 00 00 00 > > HCI Event: Command Complete(0x0e) plen 10 > 01 0D 04 00 B0 3A 4C 3D 0F 00 > > HCI Event: Disconn Complete(0x05) plen 4 > 00 28 00 05 The PIN code you entered is simply wrong. Try "BlueZ". Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux. http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users