Hello.

I am with the same problem.

>I'm trying to create a simple piconet consisting of a master and two slaves. I'm using three Digicom Palladio

>dongles.

>My packages list is:

> - bluez-libs-2.8-1.i386.rpm

> - bluez-bluefw-1.0-1.i386.rpm

> - bluez-hcidump-1.10-1.i386.rpm

> - bluez-sdp-1.5-1.i386.rpm

> - bluez-pan-1.1-1.i386.rpm

> - bluez-utils-2.8-1.i386.rpm

> - bridge-utils-0.9.6-1.i386.rpm

> On master side I type:

> # hciconfig hci0 up

> # pand --listen --master --role GN

> On the first slave I type:

> # hciconfig hci0 up

> # hcitool inq

> # pand --connect <master_bt_addr>

> # ifconfig bnep0 10.10.10.2 broadcast 10.10.10.255 netmask 255.255.255.0

> if I type

> # hcitool inq

> I obtain:

> Inquiry failed.: Device or resource busy

In this point I don't have this problem "inquiry failed"

> On the second slave I type:

> # hciconfig hci0 up

> # hcitool inq

> I only obtain the master bt_addr.

> # pand --connect <master_bt_addr>

In this point I obtain other devices bluetooth except the master bt_addr, and then i can?t create a network connection with this master. I can only have a master and a slave.

> and

> # ifconfig bnep0 10.10.10.3 broadcast 10.10.10.255 netmask 255.255.255.0

> Unfortunally I obtain:

> SIOCSIFADDR: No such device

> bnep0: unknown interface: No such device

> SIOCSIFBRDADDR: No such device

> bnep0: unknown interface: No such device

> SIOCSIFNETMASK: No such device

> Can someone tell me what is wrong? Thanks.

> Jers

I don't know if i help you.

bay