Return-Path: Subject: Re: [Bluez-users] PAN pboblems From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1103293739.28046.102.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 17 Dec 2004 15:28:59 +0100 Hi, > I have several questions. > First ,a bluetooth device was expected to act as GN with the command "pand --listen --role GN".But the GN could be connected by only two PANUs.The third PANU cannot conect to the GN any more. Why? And how to set the maximal user numbers of a GN? > Second ,I used some bluetooth devices to form a simple adhoc network based on BNEP protocol, which can be shown as the following figure: > PANU1--->GN<---PANU2 sounds like a chip limitation. Add --master on the GN to force the role switch. > When GN was only conncted by PANU1,the data transmitting rate could reach about 50kbps.However ,when the GN is connected by both PANU1 and PANU2 ,the data rate reduced to about 8kbps.Why? What can I do to solve this problem? The --master option should also help, because it will combine all three devices into one piconet and thus the GN not longer have to follow more than one hopping sequence. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users