Return-Path: From: "Peter K. Martin" To: Subject: AW: [Bluez-users] Re: Toshiba and BT (SuSE 9.2) Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" In-Reply-To: <1103024865.2143.154.camel@pegasus> Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 14 Dec 2004 14:39:58 +0100 Hi Marcel, ##> ##>this time the connection is refused, because of a security=20 ##>issue. I assume that the link key you send is wrong. Remove=20 ##>the link_key file from /etc/bluetooth/ and disable pand and=20 ##>dund settings in YaST and then restart your system. Then try=20 ##>"dund -n -c ...". ##> When, at first, dund --search --persist was still active, I got = immediately - after removing link_key file - a connection to the AP. Then I disabled = the dund and pand settings in YaST. Before I started, I removed again link_key file. Here are the results Linux-Notebook:~ # dmabt Linux-Notebook:~ # hcitool scan Scanning ... 00:0B:CE:00:01:8F Bluetooth-Modul Linux-Notebook:~ # dund -n -c 00:0B:CE:00:01:8F dund[6943]: Bluetooth DUN daemon dund[6943]: Searching for LAP on 00:0B:CE:00:01:8F dund[6943]: Failed to connect to the SDP server. Connection refused(111) Linux-Notebook:~ # Linux-Notebook:~ # hcidump -x HCIDump - HCI packet analyzer ver 1.11 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 8F 01 00 CE 0B 00 18 CC 01 00 AD FC 01 > HCI Event: Command Status (0x0f) plen 4 00 01 05 04 > HCI Event: Role Change (0x12) plen 8 00 8F 01 00 CE 0B 00 01 > HCI Event: Connect Complete (0x03) plen 11 00 29 00 8F 01 00 CE 0B 00 01 00 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0040 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 29 00 0F 00 > HCI Event: Command Complete (0x0e) plen 6 01 0D 08 00 29 00 > HCI Event: Number of Completed Packets (0x13) plen 5 01 29 00 01 00 > HCI Event: Max Slots Change (0x1b) plen 3 29 00 05 > HCI Event: Link Key Request (0x17) plen 6 8F 01 00 CE 0B 00 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 8F 01 00 CE 0B 00 > HCI Event: Command Complete (0x0e) plen 10 01 0C 04 00 8F 01 00 CE 0B 00 > HCI Event: PIN Code Request (0x16) plen 6 8F 01 00 CE 0B 00 < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 8F 01 00 CE 0B 00 07 36 31 33 31 32 39 31 00 00 00 00 00 00 00 00 00 > HCI Event: Command Complete (0x0e) plen 10 01 0D 04 00 8F 01 00 CE 0B 00 > HCI Event: Link Key Notification (0x18) plen 23 8F 01 00 CE 0B 00 5D 3C F6 8F 76 A6 EF 83 C6 68 B2 C4 0F FE E2 C2 00 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 4 status 0 < HCI Command: Disconnect (0x01|0x0006) plen 3 29 00 13 > HCI Event: Command Status (0x0f) plen 4 00 01 06 04 > HCI Event: Disconn Complete (0x05) plen 4 00 29 00 16 In the meantime I got a email from ELMEG the producer of the AP. They = told me that the AP uses the LAP via DUN. So it must be possible to establish = a connection to the AP and the router. If the connection is active, what = have I to do to use it? In windows I have to initialize COM as = kableconnection between two computers and to enable the usage of this COM by the BT-connection. How to go on? Regards Peter ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users