Nachricht

mtu 1480 qdisc noqueue link/sit 0.0.0.0 brd 0.0.0.0 Linux-Notebook:~ # =20 =20 With YaST pand was set as pand --search --master and as networkdevice bnep0 was initialized, so I don't understand why it doesn't apear within the listing of ip link show. The setup of network accesses by YaST for DSL also doesn't give me the opportunity to use bnep0 as connection for DSL. There is only as = PPP-Modus PPP via Ethernet, etc. available, but not PPP via Bluetooth as I = expected.=20 =20 Please, what is to do in order to get this foolish bnep0 device availabe = for DSL? bnep0 only appears in the initialization-area for network devices. =20 The everlasting reboot with Windows in order to get internet-access is = very boring and makes me not really happy!!! =20 Regards Peter =20 ------=_NextPart_000_0023_01C4E14E.68658980 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Nachricht

Hi=20 Marcel,

here I'm again, = the story=20 is still runing. Now I'm able to connect to the BT-accesspoint with pand = only a=20 short time till timeout.

I tried hcitool = cc=20 <baddr>

At first I have = to start=20 dmabt

Linux-Notebook:~=20 # dmabt

then

Linux-Notebook:~=20 # hcitool scan

Scanning=20 ...

=20 00:0B:CE:00:01:8F =20 Bluetooth-Modul

the next step=20 was

Linux-Notebook:~=20 # hcitool cc 00:0B:CE:00:01:8F

Linux-Notebook:~=20 # hcitool con

Connections:

= <=20 ACL 00:0B:CE:00:01:8F handle 41 state 1 lm SLAVE

Linux-Notebook:~=20 # ip link show

1: = lo:=20 <LOOPBACK,UP> mtu 16436 qdisc noqueue

link/loopback=20 00:00:00:00:00:00 brd 00:00:00:00:00:00

2: = eth0:=20 <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast qlen = 1000

link/ether = 00:08:0d:a9:18:53=20 brd ff:ff:ff:ff:ff:ff

3: = sit0:=20 <NOARP> mtu 1480 qdisc noqueue

link/sit 0.0.0.0 = brd=20 0.0.0.0

Linux-Notebook:~=20 # &n= bsp; =20

With YaST pand = was set as=20 pand --search --master

and as = networkdevice bnep0=20 was initialized, so I don't understand why it doesn't apear within the = listing=20 of ip link show.

The setup of=20 network accesses by YaST for DSL also doesn't give me the = opportunity to=20 use bnep0 as connection for DSL. There is only as PPP-Modus PPP via = Ethernet,=20 etc. available, but not PPP via Bluetooth as I expected. =

Please, what is = to do in=20 order to get this foolish bnep0 device availabe for DSL? bnep0 only = appears in=20 the initialization-area for network devices.

The everlasting = reboot with=20 Windows in order to get internet-access is very boring and makes me not = really=20 happy!!!

Regards

Peter

------=_NextPart_000_0023_01C4E14E.68658980--