Return-Path: Subject: Re: [Bluez-users] BT unter SuSE 9.2 From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1102758152.19086.12.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 11 Dec 2004 10:42:32 +0100 Hi Peter, > at first, thanks a lot. Now there is no error-message any more. you are welcome. > I'm able to get a connection with the BT-accesspoint, but only for a short > time. The AP is identified as LAN/Bluetooth Network Device. > With Connection Info I see the Device name, Address and Signal strength > during connection. After a short time the connection goes down (timeout?). > > With YaST I configured bnepX and it is shown as network device bnep0. The AP > is plugged in a telephonesystem (DSL-System) which has also a router- and a > switch-function. I need the router-function in order to reach the internet. > But I'm not able to use bnep0 for the configuration of DSL with YaST neither > ISDN and Modem. I only find bnep0 in YaST at network device, like ethppp0 > and so on. Have I to install additional systems to make bnep0 available for > DSL??? Why don't you try the easy way first? Use pand to connect and then use DHCP to configure your IP address. What kind of AP is this? Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users