From: "Peter K. Martin" <Peter.K.Martin@t-online.de>
To: <bluez-users@lists.sourceforge.net>
Subject: AW: [Bluez-users] BT unter SuSE 9.2
Message-ID: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAosiAEZOtxUiHqgChZUVmh8KAAAAQAAAAe5n9ZOsCok+R7CALunouowEAAAAA@t-online.de>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
In-Reply-To: <1102679972.9481.1.camel@pegasus>
Sender: bluez-users-admin@lists.sourceforge.net
Errors-To: bluez-users-admin@lists.sourceforge.net
Reply-To: bluez-users@lists.sourceforge.net
Date: Fri, 10 Dec 2004 14:18:25 +0100

Hi Marcel,
at first, thanks a lot. Now there is no error-message any more.

I'm able to get a connection with the BT-accesspoint, but only for a =
short
time. The AP is identified as LAN/Bluetooth Network Device.
With Connection Info I see the Device name, Address and Signal strength
during connection. After a short time the connection goes down =
(timeout?).

With YaST I configured bnepX and it is shown as network device bnep0. =
The AP
is plugged in a telephonesystem (DSL-System) which has also a router- =
and a
switch-function. I need the router-function in order to reach the =
internet.
But I'm not able to use bnep0 for the configuration of DSL with YaST =
neither
ISDN and Modem. I only find bnep0 in YaST at network device, like =
ethppp0
and so on. Have I to install additional systems to make bnep0 available =
for
DSL???

Regards
Peter


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users