Subject: Re: [Bluez-users] HCI send and receive
From: Marcel Holtmann <marcel@holtmann.org>
To: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
In-Reply-To: <2de46576041207211852e826cc@mail.gmail.com>
References: <2de46576041207211852e826cc@mail.gmail.com>
Content-Type: text/plain
Message-Id: <1102484088.9988.24.camel@pegasus>
Mime-Version: 1.0
Sender: bluez-users-admin@lists.sourceforge.net
Errors-To: bluez-users-admin@lists.sourceforge.net
Reply-To: bluez-users@lists.sourceforge.net
Date: Wed, 08 Dec 2004 06:34:48 +0100

Hi Manjunath,

> I want to set up an HCI connection between 2 dongles, see the default
> packet type at connection, then send data. Now keeping the existing
> connection, I want to change packet type and  then send data....Is
> this possible????

I don't see what you expect from this, but it is possible.

> Should I write small programs just to send and receive data with known
> payload....then I can establish a connection using hcitool and use
> these programs to send and receive data passing the connection handle
> as the parameter. Is this right??

All API commands you need are there and you can always use the HCI raw
socket. It is a H:4 based, one command or data packet per read/write
interface. And it is a good idea to send L2CAP conform ACL data packets.

Regards

Marcel


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users