Return-Path: Subject: Re: [Bluez-users] Error messages from hid2hci From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1101970554.15615.63.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 02 Dec 2004 07:55:54 +0100 Hi Scott, > After upgrading my D-Link DBT-120 with the Apple firmware, I have to > use hid2hci to put it in hci mode. hid2hci usually seems to work > fine, except it prints out an error message: > > If I plug the device directly in, I get: > > Switching device 0a12:1000 to HCI mode failed (Protocol error) > > Through a hub, I get: > > Switching device 0a12:1000 to HCI mode failed (Invalid or incomplete multibyte or wide character) > > This is with a very recent Bluetooth kernel from BK, bluez-libs-2.10, > and bluez-utils-2.10 I think we should not print out certain error codes, because the switch into HCI will be still succeed. However the error is correct, because the device resets before the URB is completed. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users